Genuine new Komatsu cylinder liner with a 125 mm inside diameter. Komatsu officially supersedes old part 6151-21-2220 with 6151-22-2220. Six liners are needed for a compatible six-cylinder S6D125E-2 build.

Price on request
In transit · ~15 Feb 2027

Genuine new Komatsu cylinder liner with a 125 mm inside diameter. Komatsu officially supersedes old part 6151-21-2220 with 6151-22-2220. Six liners are needed for a compatible six-cylinder S6D125E-2 build.

Function of the liner

The cylinder liner provides the surface against which the piston rings run. Bore condition affects sealing, compression, oil control and heat transfer in the Komatsu diesel engine.

Official part-number change

Komatsu identifies 6151-22-2220 as the replacement for 6151-21-2220. Its published nominal inner diameter is 125 mm.

When replacement helps

A new liner may be required when there is scoring, excessive wear, ovality, corrosion, cavitation or sealing-seat damage. Oil consumption and low compression have multiple potential causes, including rings, pistons and valves; diagnose before replacing.

Condition and fitment

Catkom Parts specifies genuine new liners only for this long-block rebuild. Six liners are required for the six-cylinder engine. Verify the relevant S6D125E-2 engine configuration and serial number.

Installation scope

Check block seats, liner protrusion, seals and running clearances against the applicable service manual. Purchasing one liner does not automatically include O-rings, pistons or a kit of associated parts.

Fitment by build and machines

Liner 6151-22-2220 (STD) is the liner of the S6D125E-2 in Builds 10F and 10G (D65EX-12, D65P-12, D65PX-12, D75S-5, D85A-21, D85A-21B, D85E-21, D85P-21, D85C-21A/21D, D87P-2) and of the Build 10G SA6D125E-2 (PC400-6, PC450-6, WA450-3, HD255-5). In Build 10J (D87E-2; PC400LC-6 (S/N A83001+), WA450-3 Avance Plus, WA470-3H) the liner is different: 6154-21-2220.

Seals: O-rings 6150-21-2230 and 6150-21-2240, seal 6150-21-2250. Piston: 6151-32-2110 (Build 10F) or 6152-32-2510 (Build 10G).

Frequently asked questions

What replaced 6151-21-2220?

Komatsu specifies 6151-22-2220 as the current replacement.

Is this a used liner?

No, the supply specification is new only.

How many liners are needed?

Six for a six-cylinder engine.

Are O-rings included?

Not unless the actual offer expressly states a liner-and-seal kit.

Compatible engines

EngineInstalled in machines
Komatsu S6D125E-2D65EX-12, D65PX-12, D65P-12, D85ESS-2, D85ESS-2A, D60P-12, D75S-5, D85A-21, D85E-21, D85P-21, D85A-21B, D85C-21A, D85C-21D, D87P-2
Komatsu S6D125E-2 Build 10FD65EX-12, D65PX-12, D65P-12, D75S-5
Komatsu S6D125E-2 Build 10GD85A-21, D85E-21, D85P-21, D85A-21B, D85C-21A, D85C-21D, D87P-2
Komatsu SA6D125E-2 Build 10GPC400-6, PC400LC-6, PC450-6, PC450LC-6, WA450-3, WA450L-3, HD255-5

Compatible machines

MachineType
Komatsu D60P-12Crawler dozer
Komatsu D65EX-12Crawler dozer
Komatsu D65P-12Crawler dozer
Komatsu D65PX-12Crawler dozer
Komatsu D75S-5Crawler dozer
Komatsu D85A-21Crawler dozer
Komatsu D85A-21BCrawler dozer
Komatsu D85C-21ACrawler dozer
Komatsu D85C-21DCrawler dozer
Komatsu D85E-21Crawler dozer
Komatsu D85ESS-2Crawler dozer
Komatsu D85ESS-2ACrawler dozer
Komatsu D85P-21Crawler dozer
Komatsu D87P-2Crawler dozer
Komatsu HD255-5Mining truck
Komatsu WA450-3Wheel loader
Komatsu WA450L-3Wheel loader
Komatsu PC400-6Crawler excavator
Komatsu PC400LC-6Crawler excavator
Komatsu PC450-6Crawler excavator
Komatsu PC450LC-6Crawler excavator
Before ordering, check the part number (the number on the old part) and the machine / engine model. If your machine is not listed, it does not mean the part will not fit: send us the old part number or the model and we will check.

Check by old part number or model WhatsApp: old part number or machine model

Catkom Parts supplies spare parts, engine components and major assemblies for Komatsu, Caterpillar and other heavy machinery across international markets. This policy provides standard business-to-business export terms only where they are incorporated into the relevant quotation or sales agreement and legally enforceable.

1. Legal seller and applicable documents

The legal seller is the entity expressly named on the commercial invoice or signed contract. Warehouse location, website language and destination country do not by themselves determine the contracting seller. The order-specific contract, product specification, written warranty certificate and mandatory applicable law take precedence over inconsistent general website descriptions.

2. Limited commercial warranty

Unless different terms are agreed in writing before purchase, new standard replacement parts are covered against verified manufacturing/material defects for 180 calendar days from delivery; remanufactured parts are covered for 90 calendar days from delivery. Used items are described and assessed individually, without excluding any non-waivable rights.

Complete engines, long blocks, short blocks and major high-value assemblies are supplied under product-specific written terms establishing the period, start date, operating-hour limits, included components and required installation records. A general parts warranty must not be interpreted as an unconditional engine warranty.

3. Independent installation and exclusions

Products may be installed by qualified third-party workshops, following the manufacturer's technical instructions. The limited voluntary warranty does not cover defects proved to result from incorrect installation, incorrect application, contamination, improper lubrication, overheating, abnormal operating conditions, accidental damage or unauthorized modification. Installation by a third party alone is not automatic grounds to reject a claim.

4. Inspection and claims procedure

  1. Promptly notify the legal seller through the contact details on the invoice, identifying the invoice, part number and the nature of the defect. For visible delivery damage, document packaging and carrier records at receipt.
  2. Provide relevant photographs, serial numbers, operating hours and installation records reasonably needed to assess the issue. Stop using potentially unsafe equipment.
  3. Do not return or dismantle a major assembly solely for inspection without agreed technical instructions, except where urgently necessary for safety or mitigation of loss.
  4. The seller may issue an RMA and arrange remote or physical inspection. Shipping method, customs paperwork and advance cost allocation are to be agreed case by case, subject to mandatory law.
  5. If a covered defect is confirmed, the seller will provide the contractual remedy, which may include repair, a replacement component or another agreed resolution, together with any remedy that cannot lawfully be excluded.

5. Costs and limitation of voluntary coverage

Unless expressly agreed in writing, the limited voluntary warranty does not separately pay for removal/reinstallation labor, third-party workshop charges, transport, customs duties, travel, downtime, substitute equipment, loss of profit or consequential commercial losses. Any agreed contractual liability cap or exclusion applies only insofar as valid under the law governing the transaction, including any applicable rules on serious misconduct and non-excludable damages.

6. International rules and dispute resolution

Trade terms such as EXW, FCA, FOB, CIF or DAP govern allocation of delivery risks and certain logistics costs when expressly agreed using the applicable Incoterms edition; they do not, by themselves, replace a product warranty. The governing law, any applicability or agreed exclusion of the CISG, dispute forum and payment terms must be stated in the relevant contract or quotation. Mandatory laws of the destination or seller's jurisdiction may still apply.

7. Consumer transactions

These are standard B2B export terms. If a sale qualifies as a consumer transaction under applicable law, any non-waivable consumer remedies and statutory protections remain in force, regardless of these provisions.

Warranty enquiries: contact the legal seller using the official details on the commercial invoice or the Catkom Parts contact page.

Related Products

Recently Viewed

Tags Komatsu, 6151-22-2220, 6151-21-2220, camisa de cilindro, cylinder liner, 125 mm, new STD