Genuine used Komatsu crankshaft, BU Standard (STD), for the S6D125 family. Catkom Parts states the shaft is inspected, crack-free and its journals are within STD tolerances. Verify exact S6D125E-2 fitment; the bare shaft is not automatically the same product as assembly 6151-35-1010.
Genuine used Komatsu crankshaft, BU Standard (STD), for the S6D125 family. Catkom Parts states the shaft is inspected, crack-free and its journals are within STD tolerances. Verify exact S6D125E-2 fitment; the bare shaft is not automatically the same product as assembly 6151-35-1010.
Function
The crankshaft turns connecting-rod forces into rotational output. Its main and rod journals, thrust faces, oil passages and straightness determine bearing performance and long-term engine reliability.
Genuine used BU Standard condition
Catkom Parts declares the genuine used shaft inspected and free of cracks and unacceptable bending, with journal dimensions within STD limits. This is a used component, not new manufacture.
Problems addressed by replacement
Replacement may be required for a cracked, badly scored, bent or undersize/out-of-tolerance shaft. Bearing knock, low oil pressure, abnormal vibration and metal debris also have other causes, including oil delivery and damaged bearings; diagnose the full system.
Part-number and fitment distinction
6151-31-1110 appears in S6D125-family references for a bare crankshaft. For Builds 10F and 10G the crankshaft assembly is 6151-35-1010, the same in all 6D125 engines. These numbers are not proven interchangeable and bare-shaft compatibility for every E-2 serial range is not established.
Supply and fitting
This product represents a separate shaft; gear, key and hardware are included only if explicitly offered. Check bearing clearances, journal measurements, block alignment and lubrication according to the correct engine service manual.
Fitment
Crankshaft 6151-35-1010 is the same in the S6D125E-2 (Builds 10F, 10G and 10J), SA6D125E-2 and SAA6D125E-5. Main bearings 6150-21-8010 (STD) and thrust bearings 6150-21-8050; undersizes 0.25 / 0.50 / 0.75 / 1.00 mm.
Frequently asked questions
Is 6151-31-1110 the same as 6151-35-1010?
Not proven; one may be a bare shaft and the other an assembly.
Is the crankshaft new?
No, it is genuine used BU STD according to Catkom Parts.
Does low oil pressure prove shaft failure?
No. Oil pump, bearings and clearances may also be responsible.
Should I fit STD bearings without measuring?
No. Measure the actual journals and housings first.
Compatible engines
| Engine | Installed in machines |
|---|---|
| Komatsu S6D125E-2 | D65EX-12, D65PX-12, D65P-12, D85ESS-2, D85ESS-2A, D60P-12, D75S-5, D85A-21, D85E-21, D85P-21, D85A-21B, D85C-21A, D85C-21D, D87P-2 |
Compatible machines
| Machine | Type |
|---|---|
| Komatsu D60P-12 | Crawler dozer |
| Komatsu D65EX-12 | Crawler dozer |
| Komatsu D65P-12 | Crawler dozer |
| Komatsu D65PX-12 | Crawler dozer |
| Komatsu D75S-5 | Crawler dozer |
| Komatsu D85A-21 | Crawler dozer |
| Komatsu D85A-21B | Crawler dozer |
| Komatsu D85C-21A | Crawler dozer |
| Komatsu D85C-21D | Crawler dozer |
| Komatsu D85E-21 | Crawler dozer |
| Komatsu D85ESS-2 | Crawler dozer |
| Komatsu D85ESS-2A | Crawler dozer |
| Komatsu D85P-21 | Crawler dozer |
| Komatsu D87P-2 | Crawler dozer |
Check by old part number or model WhatsApp: old part number or machine model
Catkom Parts supplies spare parts, engine components and major assemblies for Komatsu, Caterpillar and other heavy machinery across international markets. This policy provides standard business-to-business export terms only where they are incorporated into the relevant quotation or sales agreement and legally enforceable.
1. Legal seller and applicable documents
The legal seller is the entity expressly named on the commercial invoice or signed contract. Warehouse location, website language and destination country do not by themselves determine the contracting seller. The order-specific contract, product specification, written warranty certificate and mandatory applicable law take precedence over inconsistent general website descriptions.
2. Limited commercial warranty
Unless different terms are agreed in writing before purchase, new standard replacement parts are covered against verified manufacturing/material defects for 180 calendar days from delivery; remanufactured parts are covered for 90 calendar days from delivery. Used items are described and assessed individually, without excluding any non-waivable rights.
Complete engines, long blocks, short blocks and major high-value assemblies are supplied under product-specific written terms establishing the period, start date, operating-hour limits, included components and required installation records. A general parts warranty must not be interpreted as an unconditional engine warranty.
3. Independent installation and exclusions
Products may be installed by qualified third-party workshops, following the manufacturer's technical instructions. The limited voluntary warranty does not cover defects proved to result from incorrect installation, incorrect application, contamination, improper lubrication, overheating, abnormal operating conditions, accidental damage or unauthorized modification. Installation by a third party alone is not automatic grounds to reject a claim.
4. Inspection and claims procedure
- Promptly notify the legal seller through the contact details on the invoice, identifying the invoice, part number and the nature of the defect. For visible delivery damage, document packaging and carrier records at receipt.
- Provide relevant photographs, serial numbers, operating hours and installation records reasonably needed to assess the issue. Stop using potentially unsafe equipment.
- Do not return or dismantle a major assembly solely for inspection without agreed technical instructions, except where urgently necessary for safety or mitigation of loss.
- The seller may issue an RMA and arrange remote or physical inspection. Shipping method, customs paperwork and advance cost allocation are to be agreed case by case, subject to mandatory law.
- If a covered defect is confirmed, the seller will provide the contractual remedy, which may include repair, a replacement component or another agreed resolution, together with any remedy that cannot lawfully be excluded.
5. Costs and limitation of voluntary coverage
Unless expressly agreed in writing, the limited voluntary warranty does not separately pay for removal/reinstallation labor, third-party workshop charges, transport, customs duties, travel, downtime, substitute equipment, loss of profit or consequential commercial losses. Any agreed contractual liability cap or exclusion applies only insofar as valid under the law governing the transaction, including any applicable rules on serious misconduct and non-excludable damages.
6. International rules and dispute resolution
Trade terms such as EXW, FCA, FOB, CIF or DAP govern allocation of delivery risks and certain logistics costs when expressly agreed using the applicable Incoterms edition; they do not, by themselves, replace a product warranty. The governing law, any applicability or agreed exclusion of the CISG, dispute forum and payment terms must be stated in the relevant contract or quotation. Mandatory laws of the destination or seller's jurisdiction may still apply.
7. Consumer transactions
These are standard B2B export terms. If a sale qualifies as a consumer transaction under applicable law, any non-waivable consumer remedies and statutory protections remain in force, regardless of these provisions.
Warranty enquiries: contact the legal seller using the official details on the commercial invoice or the Catkom Parts contact page.
Tags Komatsu, 6151-31-1110, virabrequim, crankshaft, S6D125, used BU STD



-228x228.jpg)



