Remanufactured (REMAN) long block for Komatsu SAA6D170E-5 engines (6D170, 23.15 L, Tier 3 common rail) used in HD465-7E0, HD465-7R, HD605-7E0, HD605-7R, D375A-5E0, D375A-5R, D375A-6, PC1250-8 and WA600-6. Applicability is engine level, so every unit is identified by its own nameplate and confirmed by your engine serial number.
- Manufacturer:
- Model:CKP-LB-SAA6D170E5-RM
- SKU:CKP-LB-SAA6D170E5-REMAN
- Fitment: SAA6D170E-5, D375A-5E0, D375A-5R, D375A-6, D375A-6R, PC1250-8 +12 more details
- Available:In transit · ~15 Feb 20270
- Stock by warehouseIn transit: 3 pcs → Brazil (Guarulhos), expected at the warehouse ~15 Feb 2027
- Show all attributes
Remanufactured (REMAN) long block for Komatsu SAA6D170E-5 engines of the 6D170 family (6 cylinders, 23.15 L, Tier 3 generation with common-rail injection). The engine is used in rigid dump trucks HD465-7E0, HD465-7R, HD605-7E0 and HD605-7R, crawler dozers D375A-5E0, D375A-5R, D375A-6 and D375A-6R, PC1250-8 hydraulic excavators and WA600-6 wheel loaders. Komatsu reference documentation available to us has no machine list for a remanufactured long block of this engine, so applicability is given at engine level and every unit is confirmed by engine nameplate and serial number. The first batch of 3 units is in transit and expected in February 2027 at our warehouse in Guarulhos (São Paulo), Brazil.
Key facts
- Engine model: SAA6D170E-5 (6D170 family), 6 cylinders in line, 23.15 L, Tier 3, common-rail injection
- Product type: long block (engine sub-assembly)
- Condition: remanufactured (REMAN)
- Main machines (engine level): HD465-7E0, HD465-7R, HD605-7E0, HD605-7R, D375A-5E0, D375A-6, PC1250-8, WA600-6
- Komatsu reference numbers (identification only): RM6245-LE-0100 (presumably the remanufactured long block for this engine family, by number series; not confirmed) and 6245-LE-0100
- Our model code: CKP-LB-SAA6D170E5-RM
- Availability: in transit; first batch of 3 units expected in February 2027 at our warehouse in Guarulhos (São Paulo), Brazil
What is a long block (and how it differs from a short block and a complete engine)
A long block is an engine sub-assembly and a cost-effective alternative to replacing the complete engine: block, crankshaft, pistons and connecting rods plus cylinder heads with valves and valve train; serviceable attachments are reused. A short block is smaller: cylinder block, crankshaft, pistons, connecting rods and liners, without cylinder head. A complete engine (engine assembly) includes all attachments. According to Komatsu reference documentation, the main components are common to long blocks, but contents can differ slightly by engine type and size. For this engine the content of each unit is fixed in the specification.
Scope of supply
According to the Komatsu Reman long block description (Komatsu Reman brochure FENS00962, page 6, section “Long blocks — Product configuration”), the main components are common to all Komatsu long blocks, with slight differences depending on the engine type. The document describes the program in general, not a separate part number for the SAA6D170E-5, so the list below is Komatsu’s typical configuration as a reference, not a statement about the exact unit supplied.
Included in a long block according to the Komatsu table:
- cylinder block;
- cylinder head assembly;
- intake and exhaust valves;
- crankshaft;
- pistons and connecting rods;
- front drive gears;
- camshaft and cam follower assembly;
- rocker arm assembly;
- oil pump assembly.
Also listed in the Komatsu table (marked with an asterisk, “except on 6D140 long blocks” — this exception does not apply to the 6D170 family):
- front gear cover;
- oil cooler assembly;
- water pump assembly;
- injectors — only for electronic fuel systems, which includes the Common Rail system of the SAA6D170E-5.
Confirmed for each unit separately: the actual scope of the unit we supply — in particular the oil cooler, water pump, front gear cover, injectors and gasket set — is stated in the specification before payment. Anything not included is transferred from your old engine (see the section below).
Comparison of configurations: short block, long block and complete engine
This comparison is based on the Komatsu Reman table and diagram (FENS00962, page 6) and on the general design of these engines. “Per Komatsu” means the item is stated in the document; “usually” means a typical configuration that the document does not confirm.
Short block — the lower part of the engine
- Cylinder block — included (per Komatsu diagram).
- Crankshaft — included (per Komatsu diagram).
- Pistons, connecting rods and cylinder liners — usually included; the Komatsu document does not list them item by item for the short block.
- Cylinder heads, valves, camshaft and rocker arms — not included.
- Front drive gears, oil pump, front gear cover, oil cooler, water pump and injectors — not specified for the short block in the document.
Long block — short block plus cylinder heads and valve train
- Everything in the short block.
- Cylinder head assemblies, intake and exhaust valves — included (per Komatsu).
- Camshaft with cam followers and rocker arms — included (per Komatsu).
- Front drive gears and oil pump — included (per Komatsu).
- Front gear cover, oil cooler and water pump — included per the Komatsu table (except 6D140 long blocks); for our unit this is confirmed in the specification.
- Injectors — per the Komatsu table, included only for electronic fuel systems; for our unit this is confirmed in the specification.
- Turbocharger, high-pressure pump and Common Rail, manifolds, alternator, starter and electronic control unit — not in the Komatsu table, usually transferred from the old engine.
Complete engine
- Everything in the long block plus ancillaries: turbocharger, Common Rail fuel system, intake and exhaust manifolds, alternator, starter, flywheel with housing, electronic control unit (according to the specification of the particular engine).
- The Komatsu document has no separate “complete engine” configuration: this is a typical scope, not a specification of a particular SAA6D170E-5.
In short: a long block saves you assembling the cylinder heads and valve train and replaces the worn core of the engine, while the ancillaries are transferred from your old engine. The scope of our unit is confirmed in the specification before payment.
Engine technical data
- 6 cylinders in line, 4-stroke, water-cooled, direct injection
- Turbocharged and air-to-air aftercooled
- Bore × stroke: 170 × 170 mm; displacement 23.15 L
- Tier 3 generation (ecot3), electronically controlled common-rail injection (HPCR)
- Power depends on the machine arrangement. Example: the WD600-6 wheel dozer is described in trade press with the Tier 3 SAA6D170E-5 engine at 502 hp (third-party data, for reference only — verify by your engine nameplate).
Application (machines)
Engine-level applicability, according to Komatsu short block listings for SAA6D170E-5 (short block numbers in brackets) and, where stated, parts catalogs. Komatsu reference documentation available to us has no machine list for a remanufactured long block of this engine, so the long block is confirmed by engine nameplate and serial number.
- Rigid dump trucks: HD465-7E0, HD465-7R, HD605-7E0, HD605-7R (6245-SE-0011)
- Crawler dozers: D375A-5E0, D375A-5R, D375A-6, D375A-6R (6245-SE-0021)
- Hydraulic excavators: PC1250-8, PC1250LC-8, PC1250SP-8, PC1250-8R, PC1250LC-8R, PC1250SP-8R (6245-SE-0031)
- Wheel loaders: WA600-6, WA600-6R (6245-SE-0041)
- Wheel dozer: WD600-6, according to parts catalogs (for reference — verify by your engine nameplate)
Not this engine
- SA6D170E-3 / SAA6D170E-3: earlier generation, e.g. PC1250-7, HD465-7, D375A-5, WA600-3
- SAA6D170E-7: later generation
Watch the suffixes: HD465-7 and D375A-5 without E0 or R belong to the -3 generation, while HD465-7E0, HD465-7R, D375A-5E0 and D375A-5R use the SAA6D170E-5.
Engine arrangements (letter variants) and engine serial numbers
Code reading: S = turbocharged, first A = aftercooled, second A = air-to-air aftercooled, 6D = 6 cylinders in line, 170 = bore class in mm, E = emission generation designation, -5 = series. The letter after the series is the arrangement for a specific machine: ratings, attachments and sometimes internal parts. The full model with letter and the engine serial number (ESN) are on the engine nameplate.
Arrangements with starting ESN ("-up" = from this serial onwards), according to parts catalogs (for reference — verify by your engine nameplate):
- SAA6D170E-5AR: WA600-6R, ESN 610512-up
- SAA6D170E-5BR: HD465-7R / HD605-7R, ESN 610861-up (also 613013-up for HD465-7R)
- SAA6D170E-5C: PC1250-8 / PC1250LC-8 / PC1250SP-8, ESN 511700-up
- SAA6D170E-5CR: PC1250-8R / PC1250SP-8R, ESN 610911-up
- SAA6D170E-5E: D375A-6, ESN 511657-up
Lower confidence (seller data only): SAA6D170E-5A for WA600-6 / WD600-6 (ESN 511694-up); SAA6D170E-5B for HD465-7E0 / HD605-7E0 (ESN 511668-up); SAA6D170E-5EE for D375A-6R (ESN 610984-up); SAA6D170E-5F for HD465-7E1 / HD605-7E1 (ESN 513388-up). The -7E1 designations appear only in this seller data and are confirmed individually.
Interchange between arrangements is not documented. The base engine is the same model and the attachments are transferred from your engine, but internal revisions exist: parts catalogs show a cylinder block split inside the -5E arrangement by engine serial sub-range (511657–511771), for reference only. We therefore confirm compatibility by your engine serial number.
Reference part numbers
Komatsu numbers are given for reference only, for identification and search. The unit we supply is identified by its own plate and markings and is not declared as a product under any of the numbers listed.
The Komatsu Australia online catalog (section “Short Long Block”) lists two items named LONG BLOCK; the manufacturer in the catalog is Komatsu Limited:
- 6245-LE-0100 — LONG BLOCK (listing in the Komatsu Australia catalog);
- RM6245-LE-0100 — LONG BLOCK (listing in the Komatsu Australia catalog).
Both listings carry the note “LONG BLOCK-NOT FOR SALE”; the engine model and application are not stated. The RM prefix is consistent with the designation of Komatsu remanufactured (Reman) components, but the status of the number and its application to a specific engine need further confirmation. The relationship between 6245-LE-0100 and RM6245-LE-0100 is not described in the documentation. By the number series (6245 is the series of short blocks and parts of the SAA6D170E-5 engine) these items presumably belong to this engine family; this is our conclusion and is not confirmed by documents.
Short blocks (a smaller assembly, a different product) per Komatsu reference documentation: 6245-SE-0011 (HD465 / HD605 trucks), 6245-SE-0021 (D375A dozers), 6245-SE-0031 (PC1250 excavators), 6245-SE-0041 (WA600 loaders).
Important nuances: do not confuse
- Applicability is engine level only; no long block machine list is available to us.
- RM6245-LE-0100 is linked to this engine by number series only (inference, not confirmed).
- HD465-7 / D375A-5 (-3 generation) are not HD465-7E0 / HD465-7R / D375A-5E0 / D375A-5R (SAA6D170E-5).
- SAA6D170E-7 is a later, different generation.
- No reference configuration table: the content of each unit is fixed in the specification.
- The WD600-6 application and the 502 hp figure are third-party data.
What is transferred from your engine / installation recommendations
Typically transferred from your engine or supplied separately (final list per unit in the specification):
- fuel injection system: injectors, common-rail supply pump and rail
- turbocharger(s), aftercooler, intake and exhaust manifolds
- flywheel, flywheel housing and vibration damper
- starter, alternator, sensors, ECM and wiring harness
- oil pan, filters and brackets
- where not included in the unit: front gear cover, oil cooler and water pump
Installation recommendations
- Replace all filters and fluids; clean and flush the cooling system and radiator.
- Flush or replace the oil cooler; after a failure with metal debris this must always be considered.
- Inspect the turbocharger(s), aftercooler and injectors before re-use.
- Pre-lubricate the engine before the first start.
- Follow the Komatsu shop manual torque values and run-in procedure.
- Record the long block serial number at installation.
How to order and get a selection check
Send us:
- an engine nameplate photo: full engine model with arrangement letter (e.g. SAA6D170E-5C) and engine serial number;
- the machine model and machine serial number;
- photos of the old engine (front and both sides);
- if available, the number of the old long block or engine assembly.
Use the form on this site or WhatsApp (the number for your market is shown on the site). We confirm the selection in writing before payment; the specification states the scope of supply of the unit. Identification data of each unit (nameplate photo, serial number) are provided on request; for the batch in transit, after it arrives at the warehouse. The applicability block below lists compatible engines and machines.
Availability and delivery
The first batch of 3 units is in transit and expected in February 2027 at the CATKOMPARTS warehouse in Guarulhos (São Paulo), Brazil. International supply: the goods can be handed over to your logistics company for export, and supply to other countries is arranged on request. Payment first, then shipment (no cash on delivery).
Frequently asked questions
Will this long block fit my machine?
If your machine is in the engine-level list and the nameplate shows SAA6D170E-5, the long block is intended for your engine type. Because no long block machine list is available to us, we confirm every order by nameplate photo and engine serial number before payment.
Can it be installed on an engine with another arrangement letter?
Interchange between arrangements is not documented. The base engine is the same model and attachments are transferred, but internal revisions exist, such as the cylinder block split inside -5E shown in parts catalogs (for reference only). We check your letter and serial individually.
What is included in the long block?
According to the Komatsu Reman description (FENS00962, page 6), a long block includes the cylinder block, cylinder head assemblies, intake and exhaust valves, crankshaft, pistons and connecting rods, front drive gears, camshaft with cam follower assembly, rocker arm assembly and oil pump. The table also lists the front gear cover, oil cooler, water pump (except 6D140 long blocks) and injectors (only for electronic fuel systems). This is the typical scope of the program, not a statement about a specific unit: the actual scope, including the oil cooler, water pump, front cover, injectors and gasket set, is confirmed in the specification before payment.
Is it an original Komatsu part?
It is a remanufactured long block for the Komatsu SAA6D170E-5 engine, supplied by CATKOMPARTS, an independent supplier. We do not present it as an original Komatsu product, and it is not claimed to be manufactured or remanufactured by Komatsu unless the documents for a specific unit expressly state so. Identification data of each unit (nameplate photo, serial number) are provided on request; for the batch in transit, after it arrives at our warehouse.
Which part number is it?
The Komatsu Australia online catalog lists 6245-LE-0100 and RM6245-LE-0100 as LONG BLOCK (manufacturer in the catalog: Komatsu Limited, category Short Long Block, note NOT FOR SALE); the engine model is not stated and the relationship between the numbers is not described. By the number series they presumably belong to the SAA6D170E-5, but this is not confirmed. The unit we supply is identified by its own plate and is not declared as a product under either number.
Does it fit the HD465-7, D375A-5 or PC1250-7?
No. These machines use the earlier SA6D170E-3 / SAA6D170E-3 generation. The SAA6D170E-5 is used in the HD465-7E0 / HD465-7R, D375A-5E0 / D375A-5R, D375A-6 and PC1250-8 variants listed above.
What warranty is provided?
Warranty for long blocks is agreed individually and fixed in the specification or invoice. The warranty policy for each market is shown on the site.
When is it available, and can it be shipped abroad?
The first batch of 3 units is expected in February 2027 in Guarulhos (São Paulo), Brazil. After payment, the goods can be handed over to your logistics company for export.
What is the difference between a long block, a short block and a complete engine?
A short block is the lower part of the engine: the cylinder block and crankshaft (per the Komatsu diagram), usually with pistons, connecting rods and liners, but without cylinder heads. A long block adds the cylinder heads with valves, camshaft with cam followers, rocker arms, front drive gears and oil pump. A complete engine is supplied with all ancillaries. See the detailed “Comparison of configurations” section; for the SAA6D170E-5 Komatsu documentation lists four short blocks by machine group.
Related parts for this engine on our site
- Cylinder block 6245-21-1100
- Cylinder head without valves 6245-11-1100
- Crankshaft assembly 6245-31-1100
- Piston 6245-31-2110
- Camshaft assembly 6245-41-1100
- Connecting rod assembly 6245-31-3100
Komatsu® is a registered trademark of Komatsu Ltd. The brand name, engine and machine model designations and part numbers are used only to indicate the application of this product and for identification. CATKOMPARTS (Catkom Parts) is an independent supplier and is not an official dealer or representative of Komatsu Ltd. The product is not manufactured or remanufactured by Komatsu unless expressly stated in the documents for a specific unit.
Compatible engines
| Engine | Installed in machines |
|---|---|
| Komatsu SAA6D170E-5 | HD465-7E0, HD605-7E0, WD600-6, WA600-6, WA600-6R, PC1250-8, PC1250-8R, PC1250SP-8R, D375A-6, PC1250LC-8, PC1250SP-8, PC1250LC-8R, D375A-5E0, D375A-5R, D375A-6R, HD465-7R, HD605-7R |
Compatible machines
| Machine | Type |
|---|---|
| Komatsu D375A-5E0 | Crawler dozer |
| Komatsu D375A-5R | Crawler dozer |
| Komatsu D375A-6 | Crawler dozer |
| Komatsu D375A-6R | Crawler dozer |
| Komatsu PC1250-8 | Crawler excavator |
| Komatsu PC1250LC-8 | Crawler excavator |
| Komatsu PC1250LC-8R | Crawler excavator |
| Komatsu PC1250SP-8 | Crawler excavator |
| Komatsu PC1250SP-8R | Crawler excavator |
| Komatsu HD465-7R | Mining truck |
| Komatsu HD605-7R | Mining truck |
| Komatsu HD465-7E0 | Mining truck |
| Komatsu HD605-7E0 | Mining truck |
| Komatsu WD600-6 | Wheel dozer |
| Komatsu WA600-6 | Wheel loader |
| Komatsu WA600-6R | Wheel loader |
| Komatsu PC1250-8R | Crawler excavator |
Check by old part number or model WhatsApp: old part number or machine model
Catkom Parts supplies spare parts, engine components and major assemblies for Komatsu, Caterpillar and other heavy machinery across international markets. This policy provides standard business-to-business export terms only where they are incorporated into the relevant quotation or sales agreement and legally enforceable.
1. Legal seller and applicable documents
The legal seller is the entity expressly named on the commercial invoice or signed contract. Warehouse location, website language and destination country do not by themselves determine the contracting seller. The order-specific contract, product specification, written warranty certificate and mandatory applicable law take precedence over inconsistent general website descriptions.
2. Limited commercial warranty
Unless different terms are agreed in writing before purchase, new standard replacement parts are covered against verified manufacturing/material defects for 180 calendar days from delivery; remanufactured parts are covered for 90 calendar days from delivery. Used items are described and assessed individually, without excluding any non-waivable rights.
Complete engines, long blocks, short blocks and major high-value assemblies are supplied under product-specific written terms establishing the period, start date, operating-hour limits, included components and required installation records. A general parts warranty must not be interpreted as an unconditional engine warranty.
3. Independent installation and exclusions
Products may be installed by qualified third-party workshops, following the manufacturer's technical instructions. The limited voluntary warranty does not cover defects proved to result from incorrect installation, incorrect application, contamination, improper lubrication, overheating, abnormal operating conditions, accidental damage or unauthorized modification. Installation by a third party alone is not automatic grounds to reject a claim.
4. Inspection and claims procedure
- Promptly notify the legal seller through the contact details on the invoice, identifying the invoice, part number and the nature of the defect. For visible delivery damage, document packaging and carrier records at receipt.
- Provide relevant photographs, serial numbers, operating hours and installation records reasonably needed to assess the issue. Stop using potentially unsafe equipment.
- Do not return or dismantle a major assembly solely for inspection without agreed technical instructions, except where urgently necessary for safety or mitigation of loss.
- The seller may issue an RMA and arrange remote or physical inspection. Shipping method, customs paperwork and advance cost allocation are to be agreed case by case, subject to mandatory law.
- If a covered defect is confirmed, the seller will provide the contractual remedy, which may include repair, a replacement component or another agreed resolution, together with any remedy that cannot lawfully be excluded.
5. Costs and limitation of voluntary coverage
Unless expressly agreed in writing, the limited voluntary warranty does not separately pay for removal/reinstallation labor, third-party workshop charges, transport, customs duties, travel, downtime, substitute equipment, loss of profit or consequential commercial losses. Any agreed contractual liability cap or exclusion applies only insofar as valid under the law governing the transaction, including any applicable rules on serious misconduct and non-excludable damages.
6. International rules and dispute resolution
Trade terms such as EXW, FCA, FOB, CIF or DAP govern allocation of delivery risks and certain logistics costs when expressly agreed using the applicable Incoterms edition; they do not, by themselves, replace a product warranty. The governing law, any applicability or agreed exclusion of the CISG, dispute forum and payment terms must be stated in the relevant contract or quotation. Mandatory laws of the destination or seller's jurisdiction may still apply.
7. Consumer transactions
These are standard B2B export terms. If a sale qualifies as a consumer transaction under applicable law, any non-waivable consumer remedies and statutory protections remain in force, regardless of these provisions.
Warranty enquiries: contact the legal seller using the official details on the commercial invoice or the Catkom Parts contact page.
| Identification | |
| Part number | CKP-LB-SAA6D170E5-RM |
| Product type | Long block |
| Product condition | Remanufactured (reman) |
| Application | |
| Equipment brand | Komatsu |
| Engine model | SAA6D170E-5 |
Tags SAA6D170E-5, 6D170, SAA6D170, long block, REMAN long block, PC1250-8, D375A-6, HD465-7E0, HD605-7R, WA600-6









