Komatsu SAA6D140E-5 engine: specifications, applications, long block and REMAN

In brief: what you need to know about the Komatsu SAA6D140E-5

  • What it is. A Komatsu six-cylinder in-line diesel with a displacement of 15.24 L (140 mm bore, 165 mm stroke), turbocharged, with air-to-air charge-air cooling and an electronic Common Rail fuel system. Tier 3 / Stage 3A generation, successor to the 140E-3 series.
  • How much power. Output depends on the version for each machine: from 266 kW (357 hp) in the WA500-6 loader and D155AX-6 dozer (268 kW) up to 386 kW (518 hp) in the HD325-7 / HD405-7 haul trucks. PC800-8 excavator — 370 kW, HM400-2 — 338 kW, D275AX-5E0 — 337 kW.
  • Where it is fitted. D155AX-6 and D275AX-5E0 dozers, WA500-6 wheel loader, HD325-7 / HD405-7 rigid haul trucks, HM350-2 and HM400-2 / -3 articulated trucks, PC600-8, PC700-8 and PC800 / PC850-8 excavators — 16 groups of versions in total (EGR versions and “R” versions without EGR).
  • Long block. For this engine, Komatsu reference documentation lists a remanufactured long block under number RM6261-LE-0100; parts lists also show the new numbers 6261-LE-0010 and 6261-LE-0100. For machines with the SAA6D140E-5 it is a ready replacement for the worn mechanical core, without buying a complete engine.
  • The main selection rule. The engine name identifies the family; the exact assembly is defined by a chain: number → version letter (-5A, -5G, -5JR…) → engine serial number (ESN) → machine model and serial number. We run this check against a photo of your data plate before payment.
  • What we have. Remanufactured (REMAN) long block for the Komatsu SAA6D140E-5: product page. First batch — 3 units, expected in February 2027 at the warehouse in Guarulhos (São Paulo). Specification and data plate photo before payment, individual warranty, pickup in Brazil and export, delivery to Russia as far as the customs port by agreement.

How to read this article. If you want to understand how the engine is built and what a long block is for — part I (sections 1–4). If you are a buyer selecting an assembly — sections 5–8 and the questions and answers at the end. If you are an engineer or mechanic — part II (design, versions, specifications) and part III (dimensions, torques, standards, run-in, part numbers). Part III is reference material and does not have to be read in sequence.

Part I. In plain language

1. What the SAA6D140E-5 is and how to decode its name

Komatsu SAA6D140E-5 is a power unit for heavy Komatsu mining and construction equipment: dozers, wheel loaders, rigid and articulated haul trucks, and heavy PC600–PC850 excavators. The engine is built to run several shifts in a row under high load, where an hour of downtime costs more than the repair itself.

The name reads from left to right:

  • S — turbocharging; AA — air-to-air charge-air cooling;
  • 6D — six cylinders in line, diesel; 140 — cylinder bore in millimetres;
  • E — generation designation; -5 — engine series;
  • the letter after the series (for example, -5A, -5G, -5JR) — the version for a specific machine: power, ancillaries, sometimes internal parts. The full designation with the letter and the engine serial number (ESN) are stamped on the engine data plate.

The family is simply called “6D140”. In listings this name covers the -2, -3, -5, -6 and -7 generations, but they are different engines: parts between them are selected by their own numbers (more in section 10).

A short history

The S/SA6D140 series appeared at Komatsu in 1986 and has since gone through several generations: from mechanical high-pressure pumps to electronic Common Rail systems. The 140E-5 generation is a Tier 3 engine (“ecot3”): electronic injection control with pressure up to 160 MPa, cooled exhaust gas recirculation on versions without the “R” suffix, and an improved KTR110L turbocharger. For regional versions with the “R” suffix, a version without EGR is produced.

According to Komatsu's description, the 140E-5 is the successor to the 140E-3 series: the block dimensions are retained, and the cylinder block is modified for the EGR system. The version without EGR uses two combined oil filters (the 140E-3 had one) and improved twin piston cooling jets.

2. Scale: figures worth remembering

To get a feel for the size of the engine, it helps to convert the rated data into familiar quantities. Figures from the Komatsu manual are marked as such; everything we calculated from the rated data is marked as a calculation.

  • One cylinder holds about 2.54 L — like two and a half litres of milk; the whole engine is six such cylinders, 15.24 L in total (calculation: π/4 × 0.14² × 0.165 × 6; in the manual's table the value is rounded to 15 230 cm³).
  • 165 mm piston stroke. Mean piston speed is 9.9 m/s at 1 800 rpm, 10.5 m/s at 1 900 and 11.0 m/s at 2 000 rpm (calculation: 2 × stroke × speed).
  • Mean effective pressure. From the maximum torque of 2 170 N·m on the HD325-7 / HD405-7 trucks it is about 17.9 bar (calculated with 4π·T/V; for the PC800-8 about 18.1 bar, for the WA500-6 about 14.9 bar).
  • Specific output. The HD405-7 truck delivers 25.3 kW per litre of displacement (386 ÷ 15.24), the WA500-6 loader 17.5 kW/L.
  • Dry engine weight — from 1 680 to 1 920 kg depending on the version; length — from 1 461 to 1 775 mm.
  • Fuel consumption at rated power — from 204 to 223 g/(kW·h) depending on the version.
  • Firing order — 1-5-3-6-2-4; seven crankshaft main bearings; two oil jets cooling the piston crown for each cylinder (12 in total).
  • Oil: fill capacity — from 45 to 58 L (of which the changeable volume is 37 to 53 L); coolant in the engine — 24–25 L.
  • Fuel system: rail pressure up to 160 MPa; the pressure-limiting safety valve opens at about 200 MPa.

The question “how much horsepower does the SAA6D140E-5 have?” therefore has not one figure but a table: Komatsu publishes gross power at the flywheel without the fan, and it depends on the version. Metric “horsepower” (PS) differs from the American hp by about 1.4 % as well, so figures from different brochures are compared only after checking the unit and the measurement standard.

3. Where this engine works

The SAA6D140E-5 is fitted to the machines listed below (according to the Komatsu manual for 140E-5 series engines and reference lists). The same engine model works in different modes: in a truck — a long haul under load, in an excavator — matching with the hydraulic pumps, in a dozer — drawbar pull at the limit, in a loader — cycles of acceleration and loading. That is why power, controls, cooling and ancillaries differ between versions, and selecting “by cylinder bore” is not enough — the ESN is required.

Komatsu machines with the SAA6D140E-5 engine: equipment type and gross power
MachineEquipment typePower, kW (hp) / rpmMax. torque, N·m / rpmVersion
D155AX-6Crawler dozer268 (360) / 1 9001 834 / 1 300with cooled EGR
D155A-6 / D155A-6RCrawler dozer268 (360) / 1 9001 834 / 1 300without EGR
D275AX-5E0Crawler dozer337 (452) / 2 0002 030 / 1 400with cooled EGR
D275A-5RCrawler dozer337 (452) / 2 0002 030 / 1 400without EGR
WA500-6Wheel loader266 (357) / 1 9001 803 / 1 250with cooled EGR
WA500-6RWheel loader266 (357) / 1 9001 803 / 1 250without EGR
HD325-7, HD405-7Rigid haul truck386 (518) / 2 0002 170 / 1 400with cooled EGR
HD325-7R, HD405-7RRigid haul truck386 (518) / 2 0002 170 / 1 400without EGR
HM350-2Articulated truck304 (407) / 2 0001 991 / 1 400with cooled EGR
HM350-2RArticulated truck304 (407) / 2 0001 991 / 1 400without EGR
HM400-2, HM400-3M0Articulated truck338 (453) / 2 0002 089 / 1 400with cooled EGR
HM400-2R, HM400-3RArticulated truck338 (453) / 2 0002 089 / 1 400without EGR
PC600-8, PC600LC-8, PC600-8E0, PC700-8E0Hydraulic excavator323 (433) / 1 8001 944 / 1 400with cooled EGR
PC600-8R / R1, PC700-8R / R1Hydraulic excavator323 (433) / 1 8001 944 / 1 400without EGR
PC800 / PC850-8, -8E0Hydraulic excavator370 (496) / 1 8002 195 / 1 350with cooled EGR
PC800 / PC850-8R, -8R1Hydraulic excavator370 (496) / 1 8002 195 / 1 350without EGR
SDG400S-6B1 (generator set)Generator set357 (478) net / 1 800—with cooled EGR

The power of one machine cannot be transferred to another, even if the same base engine designation is given: the version determines the governor settings, the ancillaries and the test standards. The height and dimensions in the table in section 11 are given without the exhaust pipe.

Links to machine pages in our catalogue: D155AX-6, D275AX-5E0, D275A-5R, WA500-6R, HD405-7, HD405-7R, HD325-7R, HM350-2, HM400-2, HM400-3R, PC700LC-8R, PC800-8, PC850-8R1. The engine in our applicability reference: SAA6D140E-5.

Features of individual machine families

  • Dozers D155AX-6, D155A-6R, D275AX-5E0, D275A-5R. Drawbar pull at the limit in heavy dust. The D155AX-6, D275AX-5E0 and PC800 / PC850-8 engines are fitted with a KTR110L turbocharger with a water-cooled bearing housing (weight 28 kg) and an ERB-type air cleaner with automatic dust removal through the exhaust ejector.
  • WA500-6 / -6R wheel loader. Cyclic work “acceleration — loading — dumping”; the lowest torque in the group (1 803 N·m) and the lowest speed of peak torque — 1 250 rpm.
  • HD325-7 / HD405-7, HM350-2, HM400-2 / -3 trucks. The highest power in the group (386 kW on the HD) and the highest mean piston speed; the fan is driven by the engine itself.
  • PC600-8, PC700-8, PC800 / PC850-8 excavators. The engine works together with the machine's hydraulic system; the cooling fan is hydraulic.

4. What a long block is and how it differs from a short block

A long block is an engine “without the accessories”: the bottom end with crankshaft, pistons and cylinder block, plus assembled heads with valves and the valve train. For the owner it is the middle ground between repairing part by part and buying a complete engine: the turbocharger, fuel system, manifolds, electronics and other ancillaries are moved over from the old engine, and the mechanical “core” arrives already assembled and ready to install.

Assembly levels: short block, long block, complete engineThree layers: short block, the addition up to a long block, the addition up to a complete engine.What an engine “grows” from: block → short block → long block → complete engineThe higher the layer, the more assemblies it contains and the more a selection error costs+ UP TO A COMPLETE ENGINEKTR110L turbocharger · charge-air cooler · Common Rail fuel systemmanifolds · flywheel · starter, alternator · ECU, sensors, wiring · EGR (on versions without the R suffix)+ UP TO A LONG BLOCK6 cylinder heads · valves · camshaft and tappets · rocker armsfront drive gears · oil pump · gasket setSHORT BLOCK (bottom end)cylinder block · wet liners · crankshaft · pistons with connecting rods · bearing shellsaccording to the Komatsu catalogue, the short block for the SAA6D140E-5 is divided into 4 machine groupsThe actual contents of each unit are fixed in the specification before payment; the diagram shows the general principle.
Fig. 1. Four levels of the assembly: block → short block → long block → complete engine A stacked diagram: what is added at each level.
Assembly levels: what is included and what is not implied
AssemblyMeaningCylinder headsAncillaries and systems
Cylinder BlockA separate block or its assembly in a particular configurationNoNo
Short BlockThe lower mechanical assembly of the engineNoPer specification
Long BlockMechanical assembly with heads and valve trainYesPartly; the contents differ by engine type
Complete EngineThe entire power unitYesAll ancillaries, electronics, turbocharger

SAA6D140E-5 short block. In the Komatsu catalogue the short blocks for this engine are divided into four machine groups: 6261-SE-0011 (D155A-6R, D155AX-6, D275AX-5E0, D275A-5R, HD325-7 / -7R, WA500-6 / -6R), 6261-SE-0021 (PC600-8 / -8R), 6261-SE-0031 (PC800 / PC800LC / PC800SE-8 and -8R), 6261-SE-0041 (HM350-2 / -2R, HM400-2 / -2R). The Komatsu catalogue lists the long block under a single number for all these machines, while the short blocks are divided into four groups — so the specific assembly is always confirmed against the version table and the ESN.

When a long block is the best choice. If the engine's mechanical core has suffered as a whole (worn liners and piston group, scored journals, cracked heads, longitudinal wear of the camshaft), a long block replaces the entire set at once: block, crankshaft, pistons, connecting rods, liners, heads, valves and valve train are assembled and checked as one unit, and the machine's downtime is reduced to the replacement and run-in.

5. Komatsu numbers: how to read RM, R and E0

SAA6D140E-5 long block numbers

The long block for this engine is listed in Komatsu catalogues for both new and remanufactured units. Below are the numbers that appear in parts lists and reference materials. They are given for searching and cross-checking; the unit we supply is defined by its own data plate and serial number.

Reference numbers of SAA6D140E-5 long blocks and short blocks
NumberWhat it isComment
RM6261-LE-0100Remanufactured SAA6D140E-5 long block (current reference edition)List of machines — 23 models and variants with no serial number restriction (section 3 onward)
RMKLBSAA6D140-03Remanufactured SAA6D140E-5 long block (earlier edition)11 machine models; all of them are also in the RM6261-LE-0100 list. The difference in contents is the gasket set (section 6)
6261-LE-0010New long blockListed in parts lists for the SAA6D140 engine on the WA500-6
6261-LE-0100New long block (number without the RM prefix)The engine is not named in the listing; the 6261 number series is the SAA6D140E-5 series
6261-SE-0011Short blockD155A-6R, D155AX-6, D275AX-5E0, D275A-5R, HD325-7 / -7R, WA500-6 / -6R
6261-SE-0021Short blockPC600-8, PC600-8R
6261-SE-0031Short blockPC800LC-8, PC800SE-8 and their R versions
6261-SE-0041Short blockHM350-2 / -2R, HM400-2 / -2R

Komatsu divides short blocks into four groups but lists the long block under one number for all machines — this is convenient for purchasing: in the catalogue you see one assembly and one list of machines, and we confirm the version and serial range from the data plate.

What “RM” and “R” mean: two different abbreviations

  • RM at the start of a part number (RM6261-LE-0100) — a mark of Komatsu's remanufactured part range.
  • R at the end of a machine name (D155A-6R, HD405-7R, WA500-6R, PC800-8R) — a regional version, not “reman”. According to the Komatsu manual, the engines of these versions are built without an EGR system.
  • E0 (D275AX-5E0, PC700-8E0) — a machine version with a Tier 3 engine; an engine with cooled EGR.

What you get: a REMAN long block with documents

We supply the long block in the REMAN category (remanufactured): the unit is fully disassembled and cleaned, every part is inspected, worn parts are replaced or restored to the specified dimensions, and the unit is assembled and tested. For each unit, before payment you receive a specification with the scope of supply and identification data — a photo of the data plate and the serial number. For a long block, as for any complex assembly, this is the main document of the transaction.

6. What the long block includes and what carries over from the old engine

SAA6D140E-5 long block configuration

The long block includes:

  1. cylinder heads, assembled;
  2. intake and exhaust valves;
  3. cylinder block;
  4. front-end drive gears;
  5. crankshaft;
  6. pistons and connecting rods;
  7. camshaft and tappets;
  8. rocker arms;
  9. oil pump;
  10. gasket set.

Optional (agreed in the specification): front gear cover, oil cooler, water pump. The injectors and the fuel pump drive gear are carried over from the old engine.

The main assemblies are the same in all long blocks we supply, and the contents of each unit are confirmed by us in the specification before payment — you use it to check what remains to be carried over and what comes in the set.

What is usually carried over from the old engine or supplied separately

As a rule (the final list for the unit is in the specification): fuel system (injectors, high-pressure fuel pump, fuel rail), KTR110L turbocharger, charge-air cooler, intake and exhaust manifolds, EGR system (on versions without “R”), flywheel and flywheel housing, torsional vibration damper, starter, alternator, sensors, electronic control unit and wiring harness, oil pan, filters, brackets and also, if not ordered as options, the front gear cover, oil cooler and water pump.

Installation recommendations. Replace all filters and fluids; flush the cooling system and radiator; flush or replace the oil cooler (especially after a failure with metal debris); inspect the turbocharger, charge-air cooler and injectors; prime the engine with oil before the first start; follow the tightening torques and the run-in procedure in the Komatsu manual (part III of this article); record the long block serial number on installation.

7. How to select a long block: five steps

Long block selection algorithmFive steps: engine data plate, machine, assembly level, reference number, specification.How to select a long block: five steps1Enginemodel with letter(-5G, -5JR…) and ESN2Machinemodel with suffix(E0, R) and S/N3Assembly levelblock · short blocklong block · engine4Reference no.check of revisionsand limits by ESN5Specificationcontents, photoof data plate, S/NEvery link in the chain is checked: this rules out “fits by family” errors.Engine S/N and Machine S/N are different numbers; after an engine replacement they may not match the previous configuration.
Fig. 2. Five steps of long block selection Every link in the chain is checked against the data plate and documents; this rules out “fits by family” errors.

Selection is a chain of checks: reference number → exact engine version letter → Engine S/N → machine model → Machine S/N → check of revisions and limits by serial numbers → unit specification. Engine S/N and Machine S/N are different identifiers: the engine serial number belongs to the power unit, the machine number to the base machine, and after an engine replacement they do not have to match the previous configuration.

What the buyer should prepare

  1. The full engine name — SAA6D140E-5 with the version letter (-5A, -5G, -5JR…).
  2. Engine S/N — a photo of the data plate with a legible number.
  3. Machine model with the suffix: HD405-7R, not just HD405; D275AX-5E0, not D275.
  4. Machine S/N — the machine serial number.
  5. The assembly level needed — cylinder block, short block, long block or complete engine.
  6. The number of the previous part or unit, if known.
  7. Photos of the old engine from the front and both sides — this makes it easier to check the ancillaries and the assemblies to be carried over.

The SAA6D140E-5 long block is selected for the SAA6D140E-5 engine: neighbouring generations have their own long blocks — for the SA6D140E-3 and SAA6D140E-3 these are RM6218-LE-0100 and RM6218-LE-0110, for the SAA6D140E-6 (HM400-3, D155AX-7, WA500-7) — RM6262-LE-0100, for the S6D140E-2 and SA6D140E-2 — RM621B-LE-0100. More in section 10.

The same long block for the D155AX-6 and the HM400-2? The engine base is the same — SAA6D140E-5, and Komatsu lists a single long block number for both machines. The version (the letter after -5), ancillaries and serial ranges differ, so we always check the data plate of your engine; you carry the ancillary assemblies over from your own engine.

8. Our REMAN long block for the SAA6D140E-5

The site has a separate page, “REMAN long block for the Komatsu SAA6D140E-5 engine”. It is a remanufactured (REMAN) long block for a Komatsu engine: an original remanufactured Komatsu Reman unit, not a copy. CATKOMPARTS is an independent supplier of spare parts for heavy equipment.

  • First batch: 3 units, expected in February 2027 at the CATKOMPARTS warehouse in Guarulhos (São Paulo state, Brazil).
  • Brazil: pickup from the warehouse in Guarulhos or delivery across Brazil. Export: the unit can be handed over to your logistics company for shipment. Russia: delivery by agreement — as far as the customs port (Vladivostok or Saint Petersburg).
  • Payment: payment first, then shipment; for Russia — 100 % prepayment.
  • Specification before payment: the scope of supply, the reference configuration (section 6) and the list of assemblies to be carried over are fixed in writing.
  • Unit identification: a photo of the data plate and the serial number of each unit — on request; for a batch in transit — immediately after it arrives at the warehouse.
  • Reference numbers: RM6261-LE-0100, 6261-LE-0100, 6261-LE-0010 are given for cross-checking and searching; the unit supplied is defined by its own data plate.
  • The warranty on the long block is agreed individually and recorded in the specification and the invoice.
  • How to order: send a photo of the engine data plate (full model with the letter and the ESN), the machine model and serial number and photos of the old engine from the front and both sides — through the form on the site or on WhatsApp. We will check the version and the serial range and send the specification.

If you need not the whole long block but individual assemblies for your own build — the catalogue has parts for this engine: cylinder block 6261-21-1110, cylinder head assembly 6261-11-1110, crankshaft assembly 6261-31-1210, camshaft assembly 6210-41-1112, connecting rod 6261-31-3100. Catalogue numbers are given for identification; check them against the chain in section 7.

Part II. For the engineer and the mechanic

9. Engine design by assembly

The 140E-5 series is the successor to the 140E-3 series. According to Komatsu's description, it is a six-cylinder in-line four-stroke liquid-cooled diesel with an electronic Common Rail fuel system and (on versions without the “R” suffix) a cooled EGR system. The engine controller is mounted on the engine itself and automatically compensates for altitude. Below are the assemblies in the order in which it is convenient to check them during inspection and when selecting a long block.

9.1. Cylinder block and liners

  • A block with seven main bearings for the crankshaft and seven camshaft supports (the camshaft sits high — “high cam”). The main bearing cap bolts are tightened in the plastic region (with an angle turn); reuse of the bolts is limited — no more than five tightenings.
  • Wet liners: coolant washes the liner directly. The inner surface is plateau-honed and soft-nitrided. Sealing: at the top a “clevis seal” gasket, in the middle an ethylene-propylene rubber (EPR) ring, at the bottom a silicone rubber ring.
  • Two oil jets cooling the piston crown for each cylinder (12 in total). On versions without EGR — improved twin piston cooling jets.
  • On the EGR version the block is partly modified for cooled recirculation; the block dimensions are retained.
  • Front oil seal — single-lip with a dust lip.

9.2. Crankshaft, connecting rods, pistons

  • Crankshaft — closed-die forged, journals and fillets strengthened by induction hardening; seven main journals 120 mm in diameter and crankpins 90 mm in diameter. Journal undersizes: 0.25 / 0.50 / 0.75 / 1.00 mm (section 13). Crankshaft gear — 36 teeth; the torsional vibration damper is on the front end.
  • Connecting rod — forged, the cap is tightened in the plastic region, with an oil hole. The mass spread of the connecting rods in one engine — no more than 154 g.
  • Piston — made of special spheroidal graphite cast iron (FCD) with a re-entrant combustion chamber. Rings: the top ring — double-sided “keystone” with an inner relief, barrel-shaped working surface, hard chrome; the second — double-sided “keystone” with an inner relief, tapered surface, hard chrome; the oil ring — a steel M-shaped ring with a coil expander, nitrided.

9.3. Cylinder heads and valve train

  • The heads are individual — one head per cylinder (six in total), with four valves per cylinder (two intake and two exhaust). Direct injection. Centralised cooling of the bridge between the valves and the injector zone. Valve seats are pressed in (intake and exhaust). A “dry” type injector — without a sleeve.
  • The head bolts are tightened in the plastic region, five uses at most; at each use a punch mark is made on the bolt. The head cover is sealed with an O-ring.
  • The camshaft is made from a drawn steel blank, with journals and cams hardened by high-frequency currents. Drive through roller tappets, pushrods, rocker arms and crossheads that open two valves at once.
  • Valve clearances on a cold engine: intake 0.35 mm, exhaust 0.57 mm (tolerance ±0.02).

9.4. Drive and gears

The valve train and auxiliary drive is geared. Tooth counts: crankshaft gear — 36, large idler — 60, small idler — 40, auxiliary idler — 42, camshaft — 48, high-pressure fuel pump drive — 48, oil pump drive — 20, water pump drive — 23, air compressor drive — 14; on the EGR version a gear driving the EGR oil pump is added — 22 teeth. Alignment marks: crankshaft — large idler; small idler — fuel pump gear; small idler — camshaft gear. Gear backlash is in section 13.

9.5. Lubrication

  • Gear-type oil pump (20-tooth drive, 1.8 turns per crankshaft turn). The main relief valve opens at a pressure of 600 ± 50 kPa, the auxiliary one at 1 000 ± 50 kPa.
  • Full-flow combined filters, with 0.44 m² of filtering surface each; the filter safety valve opens at 343 ± 19.6 kPa.
  • SAA6D140E-5 oil cooler: 15 plates (layers), heat transfer area 1.23 m², heat transfer of at least 39 800 kcal/h; the thermostatic valve begins to open at 85 ± 1.5 °C and is fully open at 100 °C (8 mm stroke).
  • The EGR version has a separate EGR oil pump (gear-type, 1.09 turns per crankshaft turn, 22-tooth drive; relief valves 1 430 ± 100 and 1 800 ± 150 kPa), which hydraulically drives the EGR valve and the bypass valve.
  • Oil is supplied to the galleries, crankshaft, camshaft, rocker arms, piston cooling jets, gears and turbocharger.

9.6. Cooling

  • A centrifugal water pump with a gear drive (23 teeth), 1.56 turns per crankshaft turn, capacity 785 L/min, head of at least 18.5 m.
  • The thermostat begins to open at 76.5 ± 2 °C and is fully open at 90 °C (stroke of at least 9 mm).
  • The fan is hydraulic (excavators) or engine-driven (trucks, generator set). A corrosion resistor with inhibitor is optional (400, 600 or 1 000 g).

9.7. Air, boost and EGR

  • KOMATSU KTR110L turbocharger — an improved version of the KTR110 with a more efficient compressor wheel and an improved shaft. The air-cooled bearing housing version: 308 × 305 × 287 mm, weight 24 kg; water-cooled: 28 kg (standard for the D155AX, D275AX and PC800; optional on other machines).
  • Air-to-air charge-air cooler — on the machine.
  • Cooled EGR (versions without “R”): an EGR cooler of corrugated stainless steel tubes; a hydraulically driven EGR valve with electronic control; a bypass circuit with a Venturi tube and a bypass valve. Valve drive pressure — at least 1.18 MPa at low idle and 1.43 MPa at high idle. The “R” versions do not have these assemblies.
  • Air cleaners: for the D155AX-6, D155A-6, D275AX-5E0 and D275A-5R dozers — the ERB type (Komaclone multi-cyclone with automatic dust removal by the exhaust ejector); for the other machines — a cyclone filter with an evacuator valve (FRG).

9.8. Fuel system and electronics

  • Common Rail: DENSO ECD-U2 high-pressure fuel pump (forced lubrication with engine oil) and electronic control. The maximum working pressure was raised from 120 MPa (Tier 2) to 160 MPa; the pressure safety valve opens at about 200 MPa.
  • Fuel cooler (air) — 23 plates, 2.12 m²; main fuel filter — 1.06 m² (single or twin cartridge) and a pre-filter with a water separator — 1.06 m²; priming pump — manual (diaphragm) or electric; the engine controller is cooled by fuel.
  • Sensors: crankshaft speed (NE), fuel pump camshaft position (Bkup/G, 7 pulses per 2 turns), atmospheric pressure, rail pressure, oil pressure, boost pressure and charge-air temperature.
  • Electrical equipment: per the machine specification — 24 V alternator (60 or 90 A), 24 V / 11 kW starter, 12 V × 2 batteries (170 A·h).

10. Versions: letters, serial numbers, EGR and “R”, generations

10.1. What -5A, -5G, -5JR… mean

The letter after “-5” defines the version for the machine: power, ancillaries, sometimes internal parts. The serial number series 530xxx, 535xxx and 536xxx belong to the “first” -5 versions, the 63xxxx series to versions with the R suffix. The table is a guide to the versions and the starting engine serial numbers according to parts catalogues; the exact range for your engine is confirmed from the data plate.

SAA6D140E-5 versions and starting Engine S/N (according to parts catalogues, for reference)
VersionMachinesStarting Engine S/N
-5AWA500-6535838-UP
-5ARWA500-6R630345-UP
-5AHD275A-5R630336-UP
-5BPC600-8E0, PC600LC-8E0, PC650LC-8E0, PC700LC-8E0536098-UP
-5CRHM400-2R630276-UP
-5DHD325-7, HD405-7530015-UP
-5DRHD325-7R, HD405-7R630332-UP
-5EHM350-2535052-UP
-5ERHM350-2R630228-UP
-5FPC800-8E0, PC800LC-8E0536267-UP
-5GD155AX-6535751-UP
-5JRHM400-3R631995-UP

Longer designations such as SAA6D140E-5A-01, -5B-01, -5FR, -5GR-W also occur: these are version revisions, and they too are confirmed from the data plate. The -5M version (PC800 / PC850-8) also appears in parts list names.

10.2. What “535751-UP” means

“535751-UP” is a range that starts at the stated engine serial number and continues onward within the conditions of the particular publication. Within a catalogue, individual lines may have their own conditions: “from–to”, “and up”, a replacement number, a note. So “UP” is read together with the version and the diagram, and the reliable way is to check against your Engine S/N.

10.3. Versions without “R” and with “R”: how the engines differ

Versions without “R” (E0, -6, -8…) and with “R”: per Komatsu documentation
FeatureWithout “R” (with EGR)With “R” (without EGR)
Exhaust gas recirculationCooled: EGR cooler, hydraulically driven valve, Venturi bypass, EGR oil pumpNone — “EGR-less” in the manual (separate weight and gear tables)
Emission class per specificationsTier 3 / Stage 3ATier 2 / Stage 2 (or equivalent)
Dry engine weight1 750–1 920 kg1 680–1 850 kg (69–75 kg lighter)
Boost pressure at rated power, new engine (min.)116–184 kPa (depending on the machine)85–135 kPa (depending on the machine)

“R” at the end of a machine name is a regional version, and not “reman”. The RM prefix at the start of a catalogue number (RM6261-LE-0100) marks the remanufactured part range; it is a different designation.

10.4. 6D140 generations: -2, -3, -5, -6, -7

Listings include S6D140E-2, SA6D140E-3, SDA6D140E-3, SAA6D140E-5, -6 and -7. These are different engines with their own long blocks. The same machine received different generations in different years, so the final match is determined by the machine and engine serial numbers.

6D140 engine generationsGeneration scale: E-2, E-3, E-5, E-6, E-7 and the machines each generation is fitted to.Komatsu 6D140 generations and the machines they are fitted toE-2S6D140E-2SA6D140E-2D155A-5D155AX-3GD825A-2E-3SA6D140E-3SAA6D140E-3D155AX-5PC600/750/800-6, -7HD325-6, HD405-6HM350-1, HM400-1E-5SAA6D140E-5D155AX-6, D155A-6RD275AX-5E0, D275A-5RWA500-6, -6RHD325/405-7, -7RHM350-2, HM400-2HM400-3M0, -3RPC600/700/800-8E-6SAA6D140E-6HM400-3D155AX-7WA500-7E-7SAA6D140E-7WA500-8Our long block is the E-5 generation. Parts of neighbouring generations are selected by their own numbers and ESN.
Fig. 3. Komatsu 6D140 generations and the machines they are fitted to Generation scale: our long block is for the E-5 generation.
6D140 engine generations and their long blocks in Komatsu reference documentation
GenerationMachinesRemanufactured long block
S6D140E-2 and SA6D140E-2 (-2A-6, -2B-6, -2C-6)D155A-5, D155AX-3, GD825A-2, part of the WA500-3RM621B-LE-0100
SA6D140E-3 and SAA6D140E-3D155AX-5, PC600-6/-7, PC750-6/-7, PC800-6/-7, PC1800-6, HD325-6, HD405-6, HM350-1, HM400-1, part of the WA500-3RM6218-LE-0100, RM6218-LE-0110
SDA6D140E-3D275A-5, D275AX-5 (without the E0 suffix)—
SAA6D140E-5D155AX-6, D155A-6R, D275AX-5E0, D275A-5R, HD325-7 / HD405-7 (+R), HM350-2 (+R), HM400-2 (+R), HM400-3M0 / -3R, PC600-8, PC700-8, PC800 / PC850-8 (+R), WA500-6 / -6RRM6261-LE-0100
SAA6D140E-6HM400-3, D155AX-7, WA500-7RM6262-LE-0100
SAA6D140E-7WA500-8—

According to Komatsu materials for service engineers, the D155A-5 has the SA6D140E-2 (302 hp), the D155AX-5 has the SA6D140E-3 (310 hp), and the D155AX-6 moved to the SAA6D140E-5. Do not confuse the 6D140 with other large Komatsu engines: the D375A dozer runs on the SAA6D170E-5 (170 mm cylinder bore) — a detailed analysis is in our article on the SAA6D170E-5, and the D475A dozer runs on the V-type SAA12V140E-3 with cylinders of the same 140 mm bore but a completely different block.

11. Specifications by machine

All values are from the specification table for 140E-5 engines (Komatsu manual, SEN00079): gross power at the flywheel without the fan. Power, torque and idle speeds are set by the version, not by “the engine in general”. For comparison, according to the machine brochures, net power is: D155AX-6 — 264 kW (1 900 rpm), WA500-6 — 263 kW (1 900), PC800-8 — 363 kW (1 800), HM400-3R — 334 kW (2 000).

SAA6D140E-5 power and torque by machineBar chart: power 266–386 kW and torque 1803–2195 N·m.SAA6D140E-5 rated power and maximum torque (gross, per Komatsu manual)Power, kW (at rated speed)HD325 / HD405-7386 kW (518 hp)PC800 / PC850-8370 kW (496 hp)HM400-2 / -3M0338 kW (453 hp)D275AX-5E0 / D275A-5R337 kW (452 hp)PC600 / PC700-8323 kW (433 hp)HM350-2 / -2R304 kW (407 hp)D155AX-6 / D155A-6268 kW (360 hp)WA500-6 / -6R266 kW (357 hp)Maximum torque, N·m (at the speed on the right)PC800 / PC850-82 195 N·m @ 1 350HD325 / HD405-72 170 N·m @ 1 400HM400-2 / -3M02 089 N·m @ 1 400D275AX-5E0 / D275A-5R2 030 N·m @ 1 400HM350-2 / -2R1 991 N·m @ 1 400PC600 / PC700-81 944 N·m @ 1 400D155AX-6 / D155A-61 834 N·m @ 1 300WA500-6 / -6R1 803 N·m @ 1 250Power, torque and idle speeds are set by the version for the specific machine.
Fig. 4. SAA6D140E-5 power and torque by machine Gross power and maximum torque per the 140E-5 engine specification table.
SAA6D140E-5 specifications by machine (Komatsu manual, gross power, without fan)
MachineTypeVersionPower, kW (hp) / rpmMax. torque, N·m (kgf·m) / rpmIdle: max. / min., rpmFuel consumption, g/(kW·h)Dry weight, kgLength × width × height, mmOil: fill (changeable volume), LCoolant, L
PC600-8 / PC600LC-8 / -8E0, PC700-8E0 / LC-8E0ExcavatorEGR323 (433,3) / 1 8001 944 (198,4) / 1 4001 950 ± 50 / 800 ± 252091 8451 494 × 1 151 × 1 46748 (40)24
PC600-8R / R1, PC700-8R / R1Excavatorwithout EGR323 (433,3) / 1 8001 944 (198,4) / 1 4001 950 ± 50 / 800 ± 252051 7701 482 × 1 191 × 1 46748 (40)24
PC800 / PC850-8, -8E0ExcavatorEGR370 (496,4) / 1 8002 195 (223,8) / 1 3501 980 ± 50 / 825 ± 252041 9201 762 × 1 176 × 1 68658 (53)25
PC800 / PC850-8R, -8R1Excavatorwithout EGR370 (496,4) / 1 8002 195 (223,8) / 1 3501 980 ± 50 / 825 ± 252041 8501 718 × 1 176 × 1 68658 (53)25
D155AX-6DozerEGR268 (359,9) / 1 9001 834 (187,0) / 1 3002 100 (0/−50) / 740 (+40/0)2151 8001 477 × 1 109 × 1 15745 (37)25
D155A-6Dozerwithout EGR268 (359,9) / 1 9001 834 (187,0) / 1 3002 100 (0/−50) / 740 (+40/0)2151 7251 461 × 1 109 × 1 15745 (37)25
D275AX-5E0DozerEGR337 (451,6) / 2 0002 030 (207,0) / 1 4002 200 ± 50 / 700 ± 502181 8691 477 × 966 × 2 02058 (50)25
D275A-5RDozerwithout EGR337 (451,6) / 2 0002 030 (207,0) / 1 4002 200 ± 50 / 700 ± 502151 8001 461 × 966 × 2 02058 (50)25
WA500-6LoaderEGR266 (356,9) / 1 9001 803 (184,0) / 1 2502 150 ± 50 / 700 ± 25216,21 7501 477 × 1 094 × 1 43545 (37)25
WA500-6RLoaderwithout EGR266 (356,9) / 1 9001 803 (184,0) / 1 2502 150 ± 50 / 700 ± 25211,41 6801 461 × 1 094 × 1 43545 (37)25
HD325-7 / HD405-7Haul truckEGR386 (517,7) / 2 0002 170 (221,3) / 1 4002 300 ± 25 / 725 ± 252121 8101 775 × 1 009 × 1 60458 (50)25
HD325-7R / HD405-7RHaul truckwithout EGR386 (517,7) / 2 0002 170 (221,3) / 1 4002 300 ± 25 / 725 ± 252071 7401 775 × 1 009 × 1 60458 (50)25
HM350-2Articulated truckEGR304 (407,2) / 2 0001 991 (203,0) / 1 4002 200 (+50/0) / 725 ± 252231 8201 724 × 1 250 × 1 49658 (50)25
HM350-2RArticulated truckwithout EGR304 (407,2) / 2 0001 991 (203,0) / 1 4002 200 (+50/0) / 725 ± 252221 7501 724 × 1 250 × 1 49658 (50)25
HM400-2 / HM400-3M0Articulated truckEGR338 (452,6) / 2 0002 089 (213,0) / 1 4002 200 (+50/0) / 725 ± 252131 8201 724 × 1 250 × 1 49658 (50)25
HM400-2R / HM400-3RArticulated truckwithout EGR338 (452,6) / 2 0002 089 (213,0) / 1 4002 200 (+50/0) / 725 ± 252181 7501 724 × 1 250 × 1 49658 (50)25
SDG400S-6B1 (generator set)GeneratorEGR357 (478) / 1 800—1 890 ± 50 / 875 ± 252221 9501 785 × 1 242 × 1 52382 (73)53

Height — without the exhaust pipe. Common to all versions: 6 cylinders 140 × 165 mm, 15.24 L, firing order 1-5-3-6-2-4, electronic governor (DENSO ECD-U2 fuel pump), KOMATSU KTR110L turbocharger, air-to-air charge-air cooling; versions without “R” — with cooled EGR. For the SDG400S-6B1 generator set, power is given as net.

11.1. Calculated figures (our calculation from the rated data)

These values help to understand the load on the engine and to compare versions with each other. They are not manufacturer figures but calculations from the rated data: displacement — from bore and stroke, mean effective pressure — with the formula 4π·T/V, mean piston speed — as 2 × stroke × speed, torque at rated power — as power divided by angular speed.

Calculated figures by machine — our calculation from Komatsu rated data
MachineMean effective pressure (BMEP) at max. torque, barMean piston speed at rated speed, m/sSpecific output, kW/LTorque at rated speed, N·mTorque rise (peak to rated)
PC800 / PC850-818,19,924,31 96312 %
HD325-7 / HD405-717,911,025,31 84318 %
HM400-2 / -3M017,211,022,21 61429 %
D275AX-5E0 / D275A-5R16,711,022,11 60926 %
PC600 / PC700-816,09,921,21 71413 %
HM350-216,411,019,91 45137 %
D155AX-6 / D155A-6R15,110,517,61 34736 %
WA500-6 / -6R14,910,517,51 33735 %

In the truck the engine runs at high speed and at the highest specific output; in the loader and the D155 dozer it has the greatest torque rise: it lets the machine pull the load as engine speed drops.

12. Weight and dimensions

SAA6D140E-5 dry engine weightPaired columns: dry weight of the EGR and non-EGR versions.SAA6D140E-5 dry engine weight by version, kgwith EGRwithout EGR (R versions)PC800 / PC850-81 9201 850D275AX-5E0 / D275A-5R1 8691 800PC600 / PC700-81 8451 770HM350-21 8201 750HM400-2 / -3M01 8201 750HD325 / HD405-71 8101 740D155AX-6 / D155A-61 8001 725WA500-61 7501 680The version with cooled EGR is 69–75 kg heavier than the version without EGR.
Fig. 5. SAA6D140E-5 dry engine weight by version, kg The version with cooled EGR is 69–75 kg heavier than the version without EGR.
Weight and dimensions of the main assemblies and fluids (Komatsu manual)
ParameterValue
Dry engine weight1 680–1 920 kg depending on the version (section 11)
Weight difference between EGR and non-EGR versions69–75 kg (the cooled EGR version is heavier)
KTR110L turbocharger24 kg (air-cooled housing); 28 kg (water-cooled)
Turbocharger dimensions (air-cooled)308 × 305 × 287 mm
Oil in the engine45–58 L fill (changeable volume 37–53 L)
Coolant in the engine24–25 L (on the generator set with a radiator — 53 L)
Engine length1 461–1 775 mm
Engine width966–1 250 mm
Engine height (without the exhaust pipe)1 157–1 686 mm

In practice: a unit of this weight is handled only with lifting equipment and slings rated for the required load; the rigging method and lifting points are defined by the Komatsu manual for the machine. The weight of the complete engine and that of the long block differ by the weight of the turbocharger, fuel system, manifolds, flywheel, starter and alternator — the contents and weight of your unit are stated in the specification.

Part III. Reference

This part is reference material. Dimensions, torques and standards are taken from the Komatsu manual for 140E-5 series engines for comparison and for assessing the condition of parts. Before any work, check the manual edition for your Engine S/N: tolerances and tightening order are defined by it. Units: dimensions — mm, torques — N·m, pressures — kPa or MPa. “Limit” is the value at which a part is replaced or restored.

13. Part dimensions and tolerances

13.1. Cylinder block, liners, head

Cylinder block, liners and mating surfaces
ParameterStandardLimit / action
Flatness of the cylinder head mating surface0–0,060.09 — grind or replace
Injector nozzle protrusion (SAA6D140E-5)2,3–2,9—
Flatness of the block top surface0–0,090,135
Main bearing bore diameter (bolts tightened)127 (+0.018 / −0.006); out-of-round no more than 0.005—
Main bearing shell thickness3,5—
Main bearing shell inner diameter120120,15
Camshaft bushing bore diameter / bushing inner diameter69 / 6565.15 (bushing)
Liner protrusion above the block surface0,07–0,15—
Liner inner diameter: groups S and L140S — 140,12; L — 140,14
Liner out-of-round and cylindricity—0,02
Lower liner seat band: outer diameter / interference161,2 / 0,02–0,12—
Seal ring zone: outer diameter / clearance158 / 0,024–0,089—
“Liner — block” clearance0–0,163—

13.2. Crankshaft

Crankshaft journals and undersizes
SizeMain journal, mmCrankpin, mm
Standard (STD)120 (−0.050 / −0.068); wear limit 119.8890 (−0.050 / −0.068); wear limit 89.88
Undersize 0.25119,7589,75
Undersize 0.50119,5089,50
Undersize 0.75119,2589,25
Undersize 1.00119,0089,00
  • Journal out-of-round — 0–0.009, limit 0.020.
  • “Bearing shell — main journal” clearance — 0.044–0.106, allowable 0.27; “bearing shell — crankpin” — 0.042–0.110, allowable 0.24.
  • Crankshaft end play — 0.140–0.315, limit 0.50.
  • Shaft bend: coaxiality of all main journals no more than 0.150 (limit 0.20), of adjacent ones — 0.050 (limit 0.10).

13.3. Camshaft, tappets, valves, rocker arms

Camshaft, valve timing and valve train
ParameterStandardLimit
Camshaft end play0,1–0,250,36
Camshaft journal diameter65 (−0,016 / −0,036)—
Camshaft bearing clearance0,016–0,0960,15
Camshaft bend (indicator runout)—0,03
Cam lobe height: intake / exhaust55,48 ± 0,1 / 55,75 ± 0,155,08 / 55,35
Tappet: shaft / bore22 / 2221,92 / 22,07
Tappet roller: outer diameter31,731,50
Roller: inner diameter / roller pin12,7 / 12,63 ± 0,00612,78 / 12,56
Pushrod bend—0,3
Valve recess: intake and exhaust0 ± 0,100,70
Valve head margin thickness: intake / exhaust2,4 / 2,151,9 / 1,75
Seat chamfer angle: intake / exhaust30° / 45° (± 15′)—
Valve stem diameter: intake / exhaust10 (−0,045 / −0,060) / 10 (−0,074 / −0,089)—
“Stem — guide” clearance: intake / exhaust0,036–0,068 / 0,065–0,0970,22 / 0,24
Valve guide inner diameter / press-fit height10 / 22,0 ± 0,2—
Valve spring: free length (outer / inner)81,7 / 72,0—
Installed length (outer / inner)51,0 / 46,0—
Installed load, N (outer / inner)424,3 ± 21,6 / 215,6 ± 10,8377,3 / 192,1
Spring squareness deviation—2°
Rocker shaft / bushing32,0 ± 0,0065 / 32,0 (+0,087 / +0,035)—
Rocker “shaft — bushing” clearance0,0285–0,09350,13
Crosshead: stem seat depth6,2 (+0,3)6,61
Crosshead: inner diameter / guide11,04 ± 0,02 / 1111,17 / 10,95
Crosshead guide protrusion49,0 ± 0,25—
Valve clearance (cold): intake / exhaust0,35 / 0,57 (± 0,02)Adjust; locknut 58.8 N·m

13.4. Connecting rod, piston, rings

Connecting rod and piston group
ParameterStandardLimit
Connecting rod bushing: inner diameter52 (+0,049 / +0,030)52,09
“Connecting rod bushing — piston pin” clearance0,030–0,0550,11
Small-end bushing bore / big-end bore of the connecting rod57,4 / 95—
Connecting rod bearing shell: thickness / inner diameter2,5 / 90 (+0,042 / −0,008)— / 90,15
Connecting rod parallelism / twist (over a length of 264 mm)0,20 / 0,300,25 / 0,35
Mass spread of connecting rods in one engineno more than 154 g—
Piston skirt diameter: group S140 (−0,120 / −0,135)139,830
Piston skirt diameter: group L140 (−0,105 / −0,120)139,845
Piston pin: diameter / boss bore52 (0 / −0,006) / 52 (+0,045 / +0,035)—
“Pin — bore” clearance0,035–0,0510,10
“Oil ring — groove” clearance0,035–0,0600,14
Top ring end gap (load 16.5–23.5 N)0,42–0,572,0
Second ring end gap (“2RN” mark; load 16.2–24.2 N)1,15–1,301,8
Oil ring end gap (load 84.5–111.7 N)0,30–0,501,0

13.5. Drive gears, flywheel

Gear backlash (mm): EGR and non-EGR versions
Gear pairWith EGRWithout EGRLimit
Crankshaft — large idler0,028–0,3120,141–0,4250,6
Small idler — fuel pump gear0,016–0,2780,129–0,391—
Small idler — camshaft gear0,016–0,2780,129–0,391—
Large idler — auxiliary idler0,028–0,3130,141–0,425—
Auxiliary idler — oil pump0,080–0,4170,080–0,417—
Auxiliary idler — water pump0,095–0,3460,095–0,346—
Camshaft gear — air compressor drive0,118–0,3690,118–0,369—
  • “Bushing — shaft” clearance of the idler gears: large and small — 0.025–0.063 (allowable 0.20); auxiliary — 0.016–0.084 (0.20).
  • Idler gear end play: large and small — 0.06–0.24 (limit 0.4); auxiliary — 0.11–0.23 (0.4).
  • Flywheel housing: face and radial runout — limit 0.20. Flywheel: face runout 0.20, radial — 0.13.

14. Tightening torques

Special tightening torques of the 140E-5 engine
FastenerOrder / stageTorque, N·m (tolerance)
Head bolts (1)–(6); lubricate the thread with molybdenum disulfide or engine oil1st stage147 (137–157)
2nd stage289 (284–294)
3rd stageadditional 90° turn (+30°/0)
Head bolt (7)—68,6 (58,8–73,5)
Main bearing cap bolts; lubricate the thread with engine oil1st stage118 (108–127)
2nd stage235 (230–240)
3rd stageadditional 90° turn (+30°/0)
Connecting rod cap bolts; lubricate the thread and the nut bearing surface with engine oil1st stage127,5 (117,7–132,4)
2nd stageadditional 90° turn (+30°/0)
Flywheel bolts1st stage118 (113–123)
2nd stageadditional 90° turn (+30°/0)
Flywheel housing bolts1st stage191 (147–235)
2nd stage275 (245–309)
Crankshaft pulley bolt—275 (245–309)
Injector mounting bolt—66,7 (58,8–73,5)
High-pressure tube (injection)—37,3 (34,3–40,2)
Head cover bolts—32,4 (29,4–34,3)
Valve adjusting screw locknut—58,8 (52,9–64,7)

The bolts of the head, main bearing caps, connecting rod caps and flywheel are tightened in the plastic region: each such bolt is used no more than five times; on the head bolts the number of uses is marked with a punch. The head bolts are tightened in numbered order according to the manual's diagram.

15. Standard values for engine checks

The “standard for a new engine / decision criterion” table from the Komatsu manual: it is used to assess boost pressure, exhaust pressure, exhaust gas temperature and smoke density. Values are at rated power.

Boost pressure: EGR and non-EGR versionsPaired columns: minimum boost pressure for a new engine at rated power.Boost pressure at rated power (min. for a new engine), kPawith EGRwithout EGR (R versions)PC800 / PC850-8184128HD325 / HD405-7183135D275AX-5E0 / D275A-5R169116HM400-2 / -3M0160111PC600 / PC700-8147120HM350-214598D155AX-6 / D155A-611785WA500-611689Versions with cooled EGR run with a higher boost pressure (data from the standard values table).
Fig. 6. Boost pressure: EGR and non-EGR versions Minimum boost pressure for a new engine at rated power according to the standard values table.
Standard values at rated power: standard for a new engine / decision criterion
Machine and versionBoost pressure, kPa (min.)Exhaust pressure, kPa (min.)Exhaust gas temperature, °C (max.)Smoke density at sudden acceleration, Bosch (max.)
D155AX-6 (EGR)117 / 100127 / 108660 / 7002,5 / 3,5
D155A-685 / 7292 / 77670 / 7203,0 / 4,0
D275AX-5E0 (EGR)169 / 144169 / 144620 / 6702,5 / 3,5
D275A-5R116 / 99116 / 99670 / 7204,0 / 5,0
PC600-8 / -8E0, PC700-8E0 (EGR)147 / 125145 / 128650 / 7002,5 / 3,5
PC600-8R / R1, PC700-8R120 / 102116 / 99700 / 7503,0 / 4,0
PC800 / PC850-8, -8E0 (EGR)184 / 157172 / 147650 / 7002,5 / 3,5
PC800 / PC850-8R, -8R1128 / 108113 / 96700 / 7503,0 / 4,0
WA500-6 (EGR)116 / 89121 / 91650 / 7002,5 / 3,5
WA500-6R89 / 76101 / 85670 / 7204,0 / 5,0
HD325-7 / HD405-7 (EGR)183 / 156163 / 139650 / 7002,5 / 3,5
HD325-7R / HD405-7R135 / 115121 / 103680 / 7304,0 / 5,0
HM350-2 (EGR)145 / 124148 / 127620 / 6702,5 / 3,5
HM350-2R98 / 83104 / 88670 / 7204,0 / 5,0
HM400-2 / HM400-3M0 (EGR)160 / 136163 / 139650 / 7002,5 / 3,5
HM400-2R / HM400-3R111 / 94115 / 98670 / 7204,0 / 5,0

The same for all versions:

  • Intake system resistance — no more than 3.73 kPa, criterion 7.47 kPa.
  • Valve clearances — 0.35 (intake) and 0.57 mm (exhaust).
  • Compression pressure (oil at 40–60 °C, 200–250 rpm) — at least 4.1 MPa, criterion 2.8 MPa.
  • Crankcase blow-by pressure (rated power, coolant not cooler than 70 °C) — no more than 2.94 kPa, criterion 3.92 kPa.
  • Oil pressure at rated power (oil not cooler than 80 °C) — at least 0.34 MPa, criterion 0.21 MPa; at low idle — at least 0.10 MPa, criterion 0.08 MPa.
  • Oil temperature — 90–110 °C, limit 120 °C.
  • Oil consumption — no more than 0.15 % of fuel consumption, criterion 0.3 %.
  • Smoke density (Bosch): at rated power — no more than 1.5, criterion 2.5; at high idle — no more than 1.0, criterion 2.0.
  • Cranking speed — at least 110 rpm at 0 °C without starting aids and 85 rpm at −20 °C with starting aids.
  • EGR valve and bypass drive pressure (EGR versions) — at least 1.18 MPa at low idle and 1.43 MPa at high idle.

16. Load run-in and acceptance tests

The Komatsu manual describes a bench run-in in five stages with a total duration of 20 minutes (1 + 3 + 6 + 8 + 2). Values are given without the fan, with a dynamometer arm of 716 mm; fuel — ASTM No. 1 or No. 2 diesel, oil — SAE 15W-40. Below are the power build-up chart and the full tables by machine group; an assembled long block is run in according to the rules in the machine manual, and the tables serve as a guide for the test bench.

SAA6D140E-5 run-in stagesPower build-up over the five run-in stages for different machine groups.Load run-in: bench power by stage (5 stages, 20 minutes)010020030040070090011001300150017001900Speed, rpmkW268 kW266 kW323 kW386 kWD155AX-6WA500-6PC600/700-8HD325/405-7Fan not installed; dynamometer arm 716 mm; values from the run-in table of the Komatsu manual.
Fig. 7. Load run-in stages: power by stage, kW Five stages, 20 minutes; values without the fan.
Run-in stages by machine group: speed, load and power
MachineParameter1 (1 min)2 (3 min)3 (6 min)4 (8 min)5 (2 min)
D155AX-6 / D155A-6Speed, rpm7401 1971 5011 7291 900
Dynamometer load, N07471 1921 5521 883
Power, kW067134201268
D275AX-5E0 / D275A-5RSpeed, rpm7401 2601 5801 8202 000
Dynamometer load, N08911 4201 8502 244
Power, kW084168253337
PC600 / PC700 (-8, -8E0, -8R)Speed, rpm8001 1341 4221 6381 800
Dynamometer load, N09481 5131 9702 390
Power, kW081161242323
PC800 / PC850 (-8, -8E0, -8R)Speed, rpm8251 1341 4221 6381 800
Dynamometer load, N01 0871 7332 2572 739
Power, kW092185277370
WA500-6 / -6RSpeed, rpm6751 1971 5011 7291 900
Dynamometer load, N07121 1361 4791 795
Power, kW064128192266
HD325 / HD405-7 (-7R)Speed, rpm7251 2601 5801 8202 000
Dynamometer load, N01 0211 6282 1202 573
Power, kW097193290386
HM350-2 / -2RSpeed, rpm7251 2601 5801 8202 000
Dynamometer load, N08031 2811 6682 024
Power, kW076152228304
HM400-2 / -3 (-R)Speed, rpm7251 2601 5801 8202 000
Dynamometer load, N08931 4231 8542 249
Power, kW084169253338
Acceptance tests: permissible power ranges (gross, without fan, with JIS correction)
MachinePower range at rated speed, kWLoad at rated speed, N
D275AX-5E0327–347 at 2 000 rpm2 177–2 314
WA500-6248–263 at 1 900 rpm—
HM350-2295–315—
SDG400S-6B1 (net)360–382 at 1 800 rpm—

17. Parts that depend on the engine serial number

Even within the SAA6D140E-5, some parts change by serial number or version. This is normal Komatsu practice for any long-lived series — and that is exactly why we select the long block and parts by your ESN.

SAA6D140E-5 parts and limits by engine serial number (according to parts catalogues)
PartNumbers and limits
Cylinder head6261-11-1100 and 6261-11-1300; in the Komatsu catalogue 6261-11-1100 is listed as the current number for 6261-11-1300; the ESN cut-off in the catalogues is 531971 / 531972 (versions -5A-01, -5B-01); for engines of the 63xxxx series (-5FR, -5GR-W, -5JR) — 6261-11-1100. The intake seats differ by revision: 6216-11-1330 and 6261-11-1380
Main bearing shells6261-21-8000 (set, 7 pcs) for ESN 530245–531567; from 531568, and also for the 535xxx and 63xxxx series — 6210-21-8000 with the thrust set 6210-21-8050. The same 531568 cut-off is also noted for the crankshaft
Piston rings6261-31-2030 or 6261-31-2040 — depending on the version
Connecting rod bushing6261-31-3140 (from 530001, -5GR-W) or 6261-31-3130 (from 535838, -5FR, -5JR)
Exhaust valve6215-41-4220; 6215-41-4212 from ESN 630027 (-5FR, -5GR-W) and 630276 (-5JR)
Fuel pump6261-61-1100 up to ESN 531266, 6261-61-1101 from 531267; for the -5G on the D155AX-6 — version 6261-61-1204

18. Catalogue numbers of the main parts

A reference extract for searching and cross-checking. The numbers help match a part when ordering; we confirm the final fit to your engine by Engine S/N and the current supersession catalogue. “Assembly” items and individual parts are different product items.

Main parts of the SAA6D140E-5: reference numbers and quantity per engine
PartReference numberQty
Cylinder block6261-21-11001
Cylinder liner6211-22-22206
Crankshaft6261-31-12001
Piston6261-31-21306
Piston pin6211-31-24106
Pin retaining ring04065-0522012
Connecting rod6261-31-31006
Connecting rod bolt6210-31-33102 per rod
Connecting rod bearing shells (set)6210-32-30406
Camshaft6210-41-10121
Intake valve6217-41-411012
Head gasket6210-17-18146
Head bolts6217-11-1610 and 6217-11-162018 of each

Parts for this engine that are in our catalogue: cylinder block 6261-21-1110, cylinder head assembly 6261-11-1110, crankshaft assembly 6261-31-1210, camshaft assembly 6210-41-1112, connecting rod 6261-31-3100. The whole unit — the REMAN long block.

19. Five selection mistakes that cost the most

  1. Selecting “by family”. The SAA6D140E-5 is not the SA6D140E-3, not the SAA6D140E-6 and not the S6D140E-2: each generation has its own long block (section 10). Check the full engine name with the letter.
  2. Selecting by machine without the suffix. HD405-7 and HD405-7R, PC800-8 and PC800-8R, D275AX-5E0 and D275A-5R are EGR and non-EGR versions, with different weight, boost and ancillaries. The suffix is part of the name.
  3. Ignoring the ESN cut-offs. The head, main bearing shells, crankshaft and fuel pump change by serial number (section 17). A photo of the engine data plate settles the question at once.
  4. Mixing assembly levels. The front gear cover, oil cooler and water pump are optional assemblies, and the injectors are carried over from the old engine. Agree the scope in the specification before ordering, not at installation.
  5. Confusing Engine S/N and Machine S/N. These are different numbers; after an engine replacement they do not have to match. Both are needed for selection.

20. Preparing for replacement: what data to collect before disassembly

20.1. Before disassembly

Record the full engine marking, Engine S/N, model and Machine S/N and, if possible, keep the fault codes and service history. Describe the complaint: oil pressure, oil consumption, loss of power, overheating, smoke, hard starting, fuel or coolant contamination, noises, leaks. The same symptoms have different causes: low oil pressure depends on temperature, viscosity, the sensor, filters and bearing clearances; high fuel consumption depends on injection, air, EGR and load, not only on piston group wear.

20.2. Mechanical part

Block and liners — geometry and fits; crankshaft — journals, runout, cracks; connecting rods — geometry and bushings; pistons — surfaces and rings; heads — sealing, seats, guides, valve train. The fitness criteria are in section 13. If wear has affected several assemblies at once, a long block is usually more economical than repairing by components: all its dimensions are brought to standard at the same time.

20.3. Lubrication, cooling, fuel

The oil pump and passages, the oil cooler, the water pump and thermostat, boost (section 15), the cleanliness of the fuel system and the injectors are assessed separately. Agree the list of ancillary assemblies carried over to the new unit before ordering — we record it in the specification so that everything fits at installation.

20.4. After installation

Prime the lubrication system before the first start, tighten the fasteners per section 14, carry out the run-in per section 16, check oil pressure, boost and temperatures against the tables in section 15 and record the long block serial number in the machine's log.

21. Operation: oil, cooling, air, fuel

Fill volumes and temperature regimes of the 140E-5 engine
ParameterValue
Oil in the engine (fill / changeable volume)45 / 37 L (D155AX-6, WA500-6); 48 / 40 L (PC600 / PC700-8); 58 / 53 L (PC800 / PC850-8); 58 / 50 L (D275, HD, HM)
Coolant in the engine24 L (PC600 / PC700-8); 25 L (other versions)
Oil working temperature90–110 °C (limit 120 °C)
Thermostatstarts to open at 76.5 ± 2 °C; fully open at 90 °C
Oil cooler thermostatic valvestarts to open at 85 ± 1.5 °C; fully open at 100 °C
Intake resistanceno more than 3.73 kPa (criterion 7.47 kPa)
Fuel pressure in the railup to 160 MPa

Take exact oil change intervals, oil grades and volumes for your machine from the machine's operation and maintenance manual: they depend on the oil pan, oil lines and working conditions. Engine life depends on load, dust, fuel and oil quality, temperature regime and regularity of maintenance; for a long block, the warranty period and terms are recorded individually in the specification and the invoice.

Conclusion

The Komatsu SAA6D140E-5 is not a single “360 or 500 hp engine” but a platform of 15.24-litre diesels with different machine and regional versions. The Komatsu manual confirms its use in the D155AX-6 and D275AX-5E0 dozers, WA500-6 loaders, HD325-7 / HD405-7, HM350-2 and HM400-2 / -3 trucks, PC600-8, PC700-8 and PC800 / PC850-8 excavators — together with the “R” versions without EGR.

For correct selection it is enough to answer five questions: which exact engine is fitted, what its serial number is, which machine it works in, which assembly is really needed and which reference number confirms it. This avoids the most expensive mistakes — ordering the wrong head, bearing shells, short block or long block. And if you need a long block — send us a photo of the engine data plate and the machine serial number: we will check the version, send the specification and a photo of the unit's data plate, and you will receive a ready mechanical “core” for your SAA6D140E-5 with an individual warranty.

Questions and answers

What does SAA6D140E-5 mean?

It is a Komatsu engine model of the 6D140 family. S — turbocharging, AA — air-to-air charge-air cooling, 6D — six cylinders in line (diesel), 140 — cylinder bore in mm, E — generation designation, “-5” — series. The letter after the series (for example, -5A, -5G, -5JR) — the version for a specific machine.

How many cylinders does the SAA6D140E-5 have and what is its displacement?

Six cylinders in line, displacement 15.24 L (15 240 cm³ by calculation; rounded to 15 230 cm³ in the manual table), bore 140 mm, stroke 165 mm, firing order 1-5-3-6-2-4. The liner or piston number is determined by the version and the Engine S/N.

How many horsepower does the SAA6D140E-5 have?

Power depends on the version. Gross power: WA500-6 — 266 kW (357 hp) at 1 900 rpm; D155AX-6 — 268 kW (360 hp) at 1 900; HM350-2 — 304 kW (407 hp); D275AX-5E0 — 337 kW (452 hp); HM400-2 — 338 kW (453 hp); PC600-8 — 323 kW (433 hp) at 1 800; PC800-8 — 370 kW (496 hp) at 1 800; HD325-7 / HD405-7 — 386 kW (518 hp) at 2 000 rpm.

What is the torque of the SAA6D140E-5?

Maximum torque (gross): WA500-6 — 1 803 N·m at 1 250 rpm; D155AX-6 — 1 834 N·m at 1 300; PC600-8 — 1 944 N·m at 1 400; HM350-2 — 1 991 N·m; D275AX-5E0 — 2 030 N·m; HM400-2 — 2 089 N·m; HD325-7 / HD405-7 — 2 170 N·m at 1 400; PC800-8 — 2 195 N·m at 1 350 rpm.

Which machines use the SAA6D140E-5?

Dozers D155AX-6, D155A-6R, D275AX-5E0, D275A-5R; wheel loaders WA500-6 / -6R; rigid dump trucks HD325-7 / HD405-7 and -7R versions; articulated dump trucks HM350-2, HM400-2 and -2R versions, HM400-3M0 / -3R; excavators PC600-8, PC700-8, PC800 / PC850-8 and -8R versions. The detailed list is in section 3; we confirm the exact version for your machine by the Engine S/N.

What is the difference between the “R” and non-“R” versions?

An “R” at the end of the machine name means a regional version, not reman. According to the Komatsu manual, engines of the “R” versions are built without an EGR system, while versions without “R” have cooled EGR (Tier 3 / Stage 3A). The version without EGR is 69–75 kg lighter and runs at a lower boost pressure.

How does the SAA6D140E-5 differ from the SA6D140E-3, SAA6D140E-6 and SAA6D140E-7?

These are different generations with their own long blocks. The SA6D140E-3 / SAA6D140E-3 is fitted, for example, to the D155AX-5, PC600/800-6/-7, HD325-6 and HM400-1; the SAA6D140E-6 — to the HM400-3, D155AX-7 and WA500-7; the SAA6D140E-7 — to the WA500-8. A long block for the SAA6D140E-5 is selected for the SAA6D140E-5.

What is a long block?

A long block is an engine without ancillaries: cylinder block, crankshaft, pistons with connecting rods, cylinder heads with valves and the valve train. The turbocharger, high-pressure fuel system, manifolds, electronics and other ancillaries are usually transferred from the old engine.

How does a long block differ from a short block?

A short block is the lower part: cylinder block, crankshaft, pistons, connecting rods, liners, without cylinder heads. A long block includes the cylinder heads and valve train. A complete engine is the entire power unit.

What is included in the SAA6D140E-5 long block?

Cylinder head assemblies, intake and exhaust valves, cylinder block, front-end drive gears, crankshaft, pistons with connecting rods, camshaft with tappets, rocker arms, oil pump and gasket set. Optional — front gear cover, oil cooler and water pump; the injectors are transferred from the old engine. The contents of each unit are confirmed in the specification before payment.

What long block numbers exist for the SAA6D140E-5?

In Komatsu reference documentation the remanufactured long block is listed under number RM6261-LE-0100 (an earlier edition — RMKLBSAA6D140-03); the new numbers 6261-LE-0010 (for the WA500-6) and 6261-LE-0100 appear in parts lists. The numbers are given for search and cross-checking; the unit supplied is identified by its own plate and serial number.

What does RM in RM6261-LE-0100 mean?

The RM prefix in Komatsu numbering marks remanufactured items. Do not confuse it with the letter R in the machine name (HD405-7R, WA500-6R): that denotes a regional version without EGR.

What short blocks exist for the SAA6D140E-5?

Four numbers by machine group: 6261-SE-0011 (D155A-6R, D155AX-6, D275AX-5E0, D275A-5R, HD325-7 / -7R, WA500-6 / -6R), 6261-SE-0021 (PC600-8 / -8R), 6261-SE-0031 (PC800LC-8, PC800SE-8 and R versions), 6261-SE-0041 (HM350-2 / -2R, HM400-2 / -2R). The order is confirmed by the Engine S/N.

Which long block is needed for the D155AX-6, WA500-6, PC800-8, HD405-7, HM400-2?

For all of these machines the Komatsu reference lists one remanufactured SAA6D140E-5 long block — RM6261-LE-0100. The engine version (-5G for the D155AX-6, -5A for the WA500-6, -5F for the PC800-8E0, -5D for the HD325-7 / HD405-7, -5CR for the HM400-2R) and the serial range are checked against the plate.

What information is needed to select a long block?

The full engine name with the version letter, the Engine S/N (photo of the plate), the machine model and serial number, the required assembly level (block, short block, long block, complete engine), the previous part number if known, and photos of the old engine from the front and both sides.

Will the long block fit my machine?

That is determined by the chain: reference number → exact version (-5A, -5G, -5JR…) → Engine S/N → machine model → Machine S/N. Send us a photo of the engine plate and the machine serial number — we will check the version and serial range and send you the specification.

Can the long block be installed on an engine with a different version letter?

The engine base is the same and the ancillaries are transferred from the old engine, but within the series there are part revisions (the head, main bearing shells, crankshaft and fuel pump change by serial number), so we confirm every case by the Engine S/N.

Do the ancillaries and the fuel system come with the long block?

No. The KTR110L turbocharger, fuel pump, charge air cooler, manifolds, flywheel, damper, starter, alternator, ECU and sensors are transferred from the old engine. The front gear cover, oil cooler and water pump are optional, as agreed in the specification.

Is this a Komatsu product?

Yes. It is an original remanufactured Komatsu Reman unit, not a copy. CATKOMPARTS is an independent supplier, not an official dealer or representative of Komatsu. Identification data for each unit (plate photo, serial number) are provided on request and, for a batch in transit, after it arrives at the warehouse.

What is the number of your long block?

The unit is identified by its own plate and serial number. The numbers RM6261-LE-0100, 6261-LE-0100 and 6261-LE-0010 are given as references for search and cross-checking.

What warranty does the long block carry?

The warranty on long blocks is agreed individually and recorded in the specification or invoice for the specific unit.

When will the REMAN long block for the SAA6D140E-5 be in stock?

The first batch — 3 units — is expected in February 2027 at the CATKOMPARTS warehouse in Guarulhos (São Paulo, Brazil). Delivery to other countries is available on request; payment first, then shipment.

How do I buy a long block and how is delivery organized?

Send a photo of the engine plate and the machine serial number through the form on the site or on WhatsApp on the long block product page. Brazil — pickup from the Guarulhos warehouse or delivery within the country; export — handover to your logistics company; Russia — delivery by arrangement to the customs port (Vladivostok or Saint Petersburg), 100 % prepayment.

What are the tightening torques for the cylinder head and main bearings?

Cylinder head bolts (1)–(6): 147 → 289 N·m, then a further 90° turn; bolt (7): 68.6 N·m. Main bearing cap bolts: 118 → 235 N·m, then a 90° turn. Connecting rod cap bolts: 127.5 N·m, then a 90° turn. Details are in section 14; always check the manual for your Engine S/N.

What are the valve clearances on the SAA6D140E-5?

On a cold engine: intake valves 0.35 mm, exhaust valves 0.57 mm (tolerance ±0.02); adjusting screw locknut — 58.8 N·m.

What is the permissible cylinder liner diameter?

Nominal bore — 140 mm, groups S and L; repair limit — 140.12 mm (group S) and 140.14 mm (group L). Out-of-round and cylindricity — limit 0.02 mm.

What is the normal compression pressure?

Not less than 4.1 MPa at an oil temperature of 40–60 °C and 200–250 rpm; decision criterion — 2.8 MPa.

What should the oil pressure be?

At rated power with oil no colder than 80 °C — not less than 0.34 MPa, criterion 0.21 MPa; at low idle — not less than 0.10 MPa, criterion 0.08 MPa.

How much oil does the SAA6D140E-5 need?

Engine fill — from 45 to 58 L (change volume 37–53 L) depending on the version: 45 / 37 L — D155AX-6 and WA500-6; 48 / 40 L — PC600 / PC700-8; 58 / 53 L — PC800 / PC850-8; 58 / 50 L — D275, HD and HM. For your machine, use the operation manual.

How much does the SAA6D140E-5 engine weigh?

Dry weight — from 1 680 to 1 920 kg depending on the version: versions with EGR — 1 750–1 920 kg, versions without EGR — 1 680–1 850 kg.

Which turbocharger is fitted to the SAA6D140E-5?

KOMATSU KTR110L: air-cooled housing version — 24 kg, water-cooled housing version — 28 kg (standard for the D155AX, D275AX and PC800).

What is the fuel system pressure?

The Common Rail system with a DENSO ECD-U2 pump operates at pressures up to 160 MPa; the safety valve opens at about 200 MPa.

What is the firing order of the cylinders?

1-5-3-6-2-4. Seven crankshaft main bearings, four valves per cylinder, two piston cooling nozzles per cylinder.

How is the run-in carried out after replacement?

According to the Komatsu manual — five load steps on the test bench, 20 minutes in total (1 + 3 + 6 + 8 + 2 min), with power rising from zero to rated. The steps by machine group are in section 16.

Can parts from engines of other generations be used on the SAA6D140E-5?

Parts are selected by the numbers and ESN of the SAA6D140E-5 engine: the -3, -6 and -2 generations have their own numbers and their own long blocks (section 10).

Why are there four short blocks but one long block?

In the Komatsu reference, the SAA6D140E-5 short blocks are divided into four machine groups, while the remanufactured long block is listed under a single number for the whole list of machines. The specific unit is confirmed by the version table and the Engine S/N.

Are the front cover, oil cooler and water pump needed separately?

These are optional assemblies: they can be included in the supply or transferred from the old engine. We record the choice in the specification before payment so that you know the scope in advance.

Glossary

Long Block
A mechanical engine assembly: block, crankshaft, pistons with connecting rods, cylinder heads with valves, valve train, without most of the ancillaries.
Short Block
The lower part of the engine: block, crankshaft, pistons, connecting rods, liners, without cylinder heads.
Complete Engine
The entire power unit; the scope of ancillaries is defined by the number.
REMAN / remanufactured
A unit that has been disassembled, cleaned, inspected and reassembled with parts replaced or restored to specified dimensions.
ESN / Engine S/N
The engine serial number from the plate. It defines the applicability limits of parts in the catalogue.
Machine S/N
The machine serial number. It does not replace the Engine S/N.
Gross / Net
Gross power at the flywheel and net power with the equipment installed.
Common Rail (HPCR)
A fuel system with a high-pressure common rail and electronic injection control; here — up to 160 MPa.
EGR
Exhaust gas recirculation; on 140E-5 engines of the non-“R” versions — cooled, with a hydraulically actuated valve and bypass.
Tier 3 / Stage 3A; Tier 2 / Stage 2
US/EU emission classes; for versions with EGR and without EGR (R), respectively.
Undersizes (US)
Reduced crankshaft journal sizes of 0.25 / 0.50 / 0.75 / 1.00 mm and the corresponding thicker bearing shells.
Plateau honing
Treatment of the liner surface with smooth “plateaus” and valleys that retain oil.
Plastic-region tightening
Tightening by an angle of turn after a preliminary torque; such bolts are reused a limited number of times.
KTR110L
The Komatsu turbocharger model on the 140E-5 engine.

Sources

The data in the article were collected from Komatsu documentation and brought together into a single picture; catalogue numbers are given for reference and are confirmed through the chain in section 7.

  • Komatsu, 140E-5 series engine manual (Shop Manual): SEN00076-16 (general description, cylinder head), SEN00079-07 (specifications, weight, dimensions), SEN00081-08 and SEN00082-06 (construction and service standards), SEN00147-07 (standard values, run-in, tests) — request the current edition for your Engine S/N.
  • Komatsu, brochures and specifications of the D155AX-6, D275AX-5E0, WA500-6, HD405-7, HM400-3R, PC800-8 machines — net power values and emission classes.
  • Komatsu reference lists and parts catalogues — for reference numbers (sections 5, 17, 18); they do not replace selection by the Engine S/N.

Calculated values (section 2 and section 11.1) are the author's calculations from Komatsu's published data, not manufacturer figures.

Komatsu® is a registered trademark of Komatsu Ltd. The brand name, engine and machine model designations and part numbers are used only to indicate the application of this product and for identification. CATKOMPARTS (Catcom Parts) is an independent supplier and is not an official dealer or representative of Komatsu Ltd. It supplies original remanufactured Komatsu Reman units, not copies.

13/11/2026