Komatsu SAA12V140E-3 engine: specifications, applications, long block and REMAN

The Komatsu SAA12V140E-3 is a twelve-cylinder, 30.48 L diesel engine for mining trucks, excavators, loaders and bulldozers. The long block is its mechanical core: the cylinder block with crankshaft, pistons, connecting rods, cylinder heads and the valve train drive. Below: what this engine is, how a long block differs from the other options, and how to choose the right one.

The essentials about this engine and the long block

  • What it is. A Komatsu V12 diesel engine with a displacement of 30.48 L (140 mm bore, 165 mm stroke), turbocharged, with air-to-air charge air cooling and an electronic Common Rail fuel system. On the machines it complies with EPA Tier 2.
  • How much power. Power is set by the variant for each machine: from 636 kW (gross) on the WA800-3E0 loader to 895 kW (1,200 hp) on the HD785-7 truck. PC2000-8 excavator — 728 kW, D475A-5E0 bulldozers — 671 kW, WA900-3E0 loader — 672 kW.
  • Where it is installed. HD785-7 mining truck, PC2000-8 hydraulic excavator, WA800-3E0 and WA900-3E0 wheel loaders, D475A-5E0 and D475ASD-5E0 bulldozers — five variants: -3A, -3B, -3C, -3D, -3E.
  • Long block. This is the mechanical “core” of the engine: block, crankshaft, 12 pistons with connecting rods, 12 cylinder heads with valves, valve timing, front drive gears and the oil pump. Short block reference number — 6219-SE-0011; the numbers RM6219-LE-0100 and 6219-SE-0011 are given for search and cross-checking.
  • The main selection rule. The engine name identifies the family; the exact unit is determined by a chain: number → variant letter (-3A…-3E) → engine serial number (ESN) → machine model and serial number. We run this check against a photo of your nameplate before payment.
  • What we offer. A remanufactured (REMAN) long block for the Komatsu SAA12V140E-3: product page. First batch — 3 units, expected around 15 February 2027 at the warehouse in Guarulhos (São Paulo). Specification and nameplate photo before payment, individual warranty, pickup in Brazil and export, delivery to Russia as far as the customs port by agreement.

How to read this article. If you want to understand how the engine is built and why a long block is needed — part I (sections 1–4). If you are a buyer selecting a unit — sections 5–8 and the questions and answers at the end. If you are an engineer or mechanic — part II (design, variants, specifications) and part III (dimensions, torques, catalogue numbers). Part III is reference material and does not need to be read straight through.

Part I. In plain language

1. What the SAA12V140E-3 is and how to decode the name

Komatsu SAA12V140E-3 is a Komatsu V12 engine for heavy mining and construction equipment: it is fitted to the HD785-7 mining truck, the PC2000-8 hydraulic excavator, the WA800-3E0 and WA900-3E0 wheel loaders and the D475A-5E0 bulldozers. The engine is designed to run several shifts in a row under high load, where an hour of downtime costs more than the repair itself.

The name reads from left to right:

  • S — turbocharging; AA — air-to-air charge air cooling;
  • 12V — twelve cylinders, V layout, diesel; 140 — cylinder bore in millimetres;
  • E — generation designation; -3 — engine series;
  • the letter after the series (-3A, -3B, -3C, -3D, -3E) — the variant for a specific machine: power, ancillary equipment, sometimes internal parts. The full designation with the letter and the engine serial number (ESN) are stamped on the engine nameplate.

The family is simply called “12V140”. In listings this name covers different generations (SA12V140-1, SAA12V140E-3, SAA12V140ZE-2), but these are different engines: parts between them are selected by their own numbers (more in section 10).

A short history of applications

The previous generation — the SA12V140-1 — was fitted to the HD785-3 / -5, D475A-2 and WA800-2. The 140E-3 generation uses an electronic Common Rail system (HPCR); on the HD785-7 truck the engine develops 895 kW, and in its brochure Komatsu calls it the high-performance SAA12V140E-3 engine. On the machines the engine is certified to EPA Tier 2. In the WA900-3E0 brochure, Komatsu describes the system as an electronic Heavy Duty Common Rail that provides optimum fuel combustion and quick throttle response.

2. Scale: numbers worth remembering

To get a feel for the engine's size, it helps to convert the specification data into familiar quantities. Figures from Komatsu documentation are marked as such; everything we calculated from the specification data is labelled as a calculation.

  • One cylinder holds about 2.54 L — like two and a half one-litre cartons of milk; the whole engine has twelve such cylinders, for a total of 30.48 L (calculation: π/4 × 0.14² × 0.165 × 12).
  • Piston stroke 165 mm. The mean piston speed is 9.9 m/s at 1,800 rpm, 10.5 m/s at 1,900, 11.0 m/s at 2,000 and 11.3 m/s at 2,050 rpm (calculation: 2 × stroke × speed).
  • Specific output. On the HD785-7 truck — 29.4 kW per litre of displacement (895 ÷ 30.48), on the PC2000-8 excavator — 23.9 kW/L, on the WA800-3E0 loader — 20.9 kW/L (calculated from gross power).
  • Torque from power at rated speed — about 4,498 N·m on the HD785-7 (calculation: power ÷ angular speed at 1,900 rpm).
  • Twelve liners, twelve pistons, twelve cylinder heads, 48 valves (four per cylinder) and 24 crossheads — which shows why replacing the whole long block is more reliable than repairing it part by part.
  • Seven main bearing supports of the crankshaft and seven camshaft supports; wet liners.

So the question “how much horsepower does the SAA12V140E-3 have?” has not one answer but a table: Komatsu publishes gross and net power, and they depend on the variant. Metric “horsepower” (PS) differs from US hp by about 1.4%, so figures from different brochures are compared only after checking the unit and the measurement standard.

3. Where this engine works

The SAA12V140E-3 is installed in the machines listed below (according to Komatsu brochures and the 12V140E-3 engine manual). The same engine works in different duty cycles: in a truck — a long haul under load, in an excavator — matching with the hydraulic pumps, in a bulldozer — pulling at the limit, in a loader — acceleration and loading cycles. So power, ancillaries and settings differ between variants, and selection “by cylinder bore” is not enough — you need the ESN.

Komatsu machines with the SAA12V140E-3 engine: variant, power and starting Engine S/N (for reference)
MachineEquipment typeVariantGross, kW (hp) / rpmNet, kW (hp) / rpmEngine S/N (per parts catalogues)
HD785-7Mining truck (gross vehicle weight 163,780 kg)-3B895 (1 200) / 1 900879 (1 178) / 1 900502254-UP; 505077-UP
PC2000-8Hydraulic excavator (backhoe and loading shovel)-3C728 (976) / 1 800713 (956) / 1 800501918-UP
WA900-3E0Wheel loader (bucket 11.5–13.0 m³)-3D672 / 2 050638 (856) / 2 050502369-UP
WA800-3E0Wheel loader (bucket 10.0–14.0 m³)-3E636 / 2 000603 (808) / 2 000502033-UP
D475A-5E0, D475ASD-5E0Crawler bulldozers (D475A-5E0 — 108,390 kg)-3A671 (899) / 2 000664 (890) / 2 000502127-UP

The power of one machine cannot be transferred to another, even if the same base engine designation is given: the variant determines the governor settings, ancillaries and test standards. The “-02” revisions (3B-02, 3E-02) have their own serial number ranges.

Features of individual machine families

  • HD785-7 mining truck. The highest power in the group (895 kW) and the highest load on the engine on long hauls; according to the Komatsu brochure, the machine has a variable horsepower control (VHPC) mode selection system and an F7-R2 transmission with two reverse speeds.
  • PC2000-8 excavator. The engine works together with the machine's hydraulic system; according to the brochure, it is equipped with a high-efficiency turbocharger with a large air-to-air charge air cooler. Operating weight — 200,000–204,120 kg (backhoe) and 195,000 kg (loading shovel).
  • WA800-3E0 and WA900-3E0 wheel loaders. Cyclic work “acceleration — loading — dumping”; rated speeds of 2,000 and 2,050 rpm, low idle — 680 rpm (+50/0) on both machines.
  • D475A-5E0 and D475ASD-5E0 bulldozers. Pulling at the limit in heavy dust; low idle — 660 ± 40 rpm; according to the brochure, the radiator fan has a hydraulic drive with automatic control.

4. What a long block is and how it differs from a short block

A long block is an engine “without the extras”: the lower part with the crankshaft, pistons and cylinder block, plus assembled heads with valves and the valve timing mechanism. For the owner, it is the middle ground between repairing part by part and buying a complete engine: turbochargers, the fuel system, manifolds, electronics and other ancillaries are carried over from the old engine, while the mechanical “core” arrives already assembled and ready to install.

Unit levels: short block, long block, complete engineThree layers: short block, the addition up to a long block, the addition up to a complete engine.What an engine is “built up” from: block → short block → long block → complete engineThe higher the layer, the more components — and the costlier a selection mistake+ UP TO A COMPLETE ENGINEturbochargers · charge air coolers · Common Rail fuel systemmanifolds · flywheel and housing · starter, alternator · ECU, sensors, wiring · oil pan+ UP TO A LONG BLOCK12 cylinder heads · 48 valves · two camshafts · tappets · rocker arms and crossheadsfront drive gears · oil pump · gasket setSHORT BLOCK (lower part)cylinder block · 12 wet liners · crankshaft · 12 pistons with connecting rods · bearing shellsshort block reference number for SAA12V140E-3: 6219-SE-0011 (HD785-7, PC2000-8)The contents of each unit are recorded in the specification before payment; the diagram shows the general principle.
Fig. 1. Four levels of the unit: block → short block → long block → complete engine. A stacked diagram: what is added at each level.
Unit levels: what is included and what is not implied
UnitMeaningCylinder headsAncillaries and systems
Cylinder Block / cylinder blockA bare block or its assembly in a certain configurationNoNo
Short BlockLower mechanical assembly of the engineNoPer specification
Long BlockMechanical assembly with heads and valve trainYesPartly; the contents vary by engine type
Complete Engine / complete engineThe whole power unitYesAll ancillaries, electronics, turbochargers

When a long block is the best choice. If the engine's “mechanics” have been damaged as a whole (wear of the liners and piston group, scored journals, cracks in the heads, camshaft wear), a long block replaces the entire set at once: block, shaft, 12 pistons, connecting rods, liners, heads, valves and valve timing are assembled and tested as one unit, and the machine's downtime is reduced to the replacement and start-up. For a twelve-cylinder engine this is especially noticeable: every inspection and every dimension selection is repeated twelve times.

5. Numbers: long block, short block, complete engine

For the SAA12V140E-3 engine, the numbers listed below appear in catalogues and commercial documentation. They are given for search and cross-checking; the unit we supply is identified by its own nameplate and serial number.

Reference numbers and related product items for the SAA12V140E-3
Number / itemWhat it isComment
RM6219-LE-0100Remanufactured long block SAA12V140E-3The number appears in commercial documentation for remanufactured long blocks; the RM prefix marks remanufactured nomenclature
6219-SE-0011Short block SAA12V140E-3Reference number for HD785-7 and PC2000-8
REMAN Long Block for Komatsu SAA12V140E-3Long block: our product, the subject of this articleHD785-7, PC2000-8, WA800-3E0, WA900-3E0, D475A-5E0, D475ASD-5E0
REMAN Engine for Komatsu HD785-7 SAA12V140E-3Complete engine, variant -3BA separate product: the whole power unit
REMAN Engine for Komatsu PC2000-8Complete engine, variant -3CA separate product: the whole power unit

What “RM” is and what the letters after “-3” mean

  • RM at the start of a part number (RM6219-LE-0100) is a mark of Komatsu's remanufactured nomenclature.
  • The letter after “-3” (-3A, -3B, -3C, -3D, -3E) is the engine variant for the machine, not an indication of reman.
  • E0 in machine names (WA800-3E0, WA900-3E0, D475A-5E0) is the version of the machine with a Tier 2 engine.

What you get: a REMAN long block with documents

We supply the long block in the REMAN category (remanufactured): the unit is fully disassembled and cleaned, every part is inspected, worn parts are replaced or restored to the specified dimensions, and the unit is assembled and tested. For each unit, before payment you receive a specification with the scope of supply and identification data — a photo of the nameplate and the serial number. For a long block, as for any complex unit, this is the main document of the deal.

6. What a REMAN long block includes and what is carried over from the old engine

Configuration of the SAA12V140E-3 long block

The long block includes:

  1. cylinder block;
  2. crankshaft;
  3. pistons with connecting rods (12 sets);
  4. cylinder heads with valves (12 heads, 48 valves);
  5. valve train: camshafts, tappets, rocker arms and crossheads;
  6. front-end drive gears;
  7. oil pump.

Optional (agreed in the specification): front gear cover, oil cooler, water pump, gasket set, injectors (for the electronic fuel system). If an optional item is not included in the supply, it is carried over from the old engine.

The main assemblies are the same for all long blocks supplied, and the final contents of each unit are confirmed by us in the specification before payment — you use it to check what remains to be carried over and what comes in the set.

What is usually carried over from the old engine

As a rule (the final list for each unit is in the specification): fuel equipment, turbochargers, charge air coolers, intake and exhaust manifolds, flywheel and flywheel housing, torsional vibration damper, starter, alternator, sensors, the electronic control unit and wiring harness, oil pan, filters and brackets.

Installation recommendations. Replace all filters and fluids; flush the cooling system and radiator; flush or replace the oil cooler (especially after a failure with metal debris); inspect the turbochargers, charge air coolers and injectors; pre-lubricate the engine with oil before the first start; follow the tightening torques in the Komatsu manual (part III of this article); record the long block serial number at installation.

7. How to select a long block: five steps

Long block selection algorithmFive steps: engine nameplate, machine, unit level, reference number, specification.How to select a long block: five steps1Enginemodel with the letter(-3A…-3E) and ESN2Machinemodel with the suffix(E0, -7, -8) and S/N3Unit levelshort block · long blockcomplete engine4Reference no.check of revisionsand ESN boundaries5Specificationcontents, photoof the nameplate, S/NEvery link in the chain is verified: this rules out “fits by family” mistakes.Engine S/N and Machine S/N are different numbers; after an engine replacement they may not match the initial configuration.
Fig. 2. Five steps to select a long block. Every link in the chain is verified against the nameplate and documents.

Selection is a chain of checks: reference number → exact letter variant of the engine → Engine S/N → machine model → Machine S/N → check of revisions and serial number boundaries → unit specification. Engine S/N and Machine S/N are different identifiers: the engine serial number refers to the power unit, the machine number refers to the base machine, and after an engine replacement they need not match the initial configuration.

What the buyer should prepare

  1. The full engine name — SAA12V140E-3 with the variant letter (-3A…-3E).
  2. Engine S/N — a photo of the nameplate with a legible number.
  3. Machine model with the suffix: WA900-3E0, not just WA900; D475A-5E0, not D475A-2.
  4. Machine S/N — the machine serial number.
  5. The required assembly level — short block, long block or complete engine.
  6. The number of the previous part or unit, if known.
  7. Photos of the old engine from the front and from both sides — this makes it easier to check the ancillaries and the parts to be carried over.

The SAA12V140E-3 long block is selected for the SAA12V140E-3 engine: the SA12V140-1 (HD785-3 / -5, D475A-2, WA800-2) and SAA12V140ZE-2 (WA900L-3) engines have their own part numbers and their own long blocks. The neighbouring engine in the range, the SAA6D140E-5, is covered in our article on the SAA6D140E-5, and the SAA6D170E-5 in the article on the SAA6D170E-5.

The same long block for the HD785-7 and PC2000-8? The engine base is the same — SAA12V140E-3, and the reference short block 6219-SE-0011 is listed for both machines. The variant (-3B and -3C), ancillaries and serial ranges differ, so we always check your engine's nameplate; you carry the ancillary components over from your own engine.

8. Our REMAN long block for the SAA12V140E-3

The site has a dedicated page “Remanufactured (REMAN) Long Block for Komatsu SAA12V140E-3 Engines”. It is a remanufactured (REMAN) long block for a Komatsu engine; CATKOMPARTS is an independent supplier of spare parts for heavy equipment. Applications per the page: HD785-7, PC2000-8, WA800-3E0, WA900-3E0, D475A-5E0 and D475ASD-5E0.

The images are illustrations of the REMAN long block. A photo of the nameplate and the serial number of a specific unit are available on request.

  • First batch: 3 units, expected around 15 February 2027 at the CATKOMPARTS warehouse in Guarulhos (São Paulo state, Brazil).
  • Brazil: pickup from the Guarulhos warehouse or delivery across Brazil. Export: the unit can be handed over to your logistics company for shipping. Russia: delivery by agreement — as far as the customs port (Vladivostok or Saint Petersburg).
  • Payment: payment first, then shipment; for Russia — 100% prepayment.
  • Specification before payment: the scope of supply, the reference configuration (section 6) and the list of parts to be carried over are recorded in writing.
  • Unit identification: a photo of the nameplate and the serial number of each unit are available on request; for a batch in transit — immediately after it arrives at the warehouse.
  • Reference numbers: RM6219-LE-0100 and 6219-SE-0011 are given for cross-checking and search; the unit supplied is identified by its own nameplate.
  • The warranty on the long block is agreed individually and recorded in the specification and the invoice.
  • How to order: send a photo of the engine nameplate (the full model with the letter and the ESN), the machine model and serial number, and photos of the old engine from the front and both sides — through the form on the site or on WhatsApp. We will check the variant and serial range and send the specification.

If you need the whole power unit rather than a long block, the catalogue has complete REMAN engines: “REMAN Engine for Komatsu HD785-7 SAA12V140E-3” and “REMAN Engine for Komatsu PC2000-8”. The catalogue numbers of the main engine parts are in section 15.

Part II. For engineers and mechanics

9. Engine design by assembly

The SAA12V140E-3 is a four-stroke V12 diesel with liquid cooling, direct injection, turbocharging and air-to-air charge air cooling, with an electronic Common Rail system. Below are the assemblies in the order in which they are convenient to check during inspection and long block selection (per the Komatsu manual for the 12V140E-3 engines).

9.1. Cylinder block and liners

  • A block with seven main bearing supports for the crankshaft and seven camshaft supports. Main bearing bore — 157 mm (+0.025 / 0).
  • Wet liners: coolant washes the liner directly. Nominal inside diameter — 140 mm, groups S and L; outside diameter at the upper flange — 170.2 mm, lower seating land — 161.2 mm with an interference of 0.02–0.12 mm, sealing ring zone — 158 mm. Liner protrusion above the block face — 0.07–0.15 mm.
  • The engine has 12 liners in total (reference number 6211-22-2220), six in each bank.

9.2. Crankshaft, connecting rods, pistons

  • The crankshaft has seven main journals of 148 mm diameter and crankpin journals of 100 mm diameter. Journal undersizes: 0.25 / 0.50 / 0.75 / 1.00 mm (section 13). Crankshaft gear — 45 teeth; a torsional vibration damper is fitted at the front end.
  • Connecting rods — left and right: the left rod 6219-31-3200 is for the left bank, the right rod 6219-31-3100 for the right bank (six of each). Rod centre distance — 340 mm, big-end diameter — 106 mm, small-end bushing diameter — 52 mm.
  • Pistons — made of special ductile (spheroidal graphite) cast iron (FCD) with a re-entrant combustion chamber; piston pin diameter 52 mm. Rings — “keystone”.

9.3. Cylinder heads and valve timing

  • The heads are individual — one head per cylinder (12 pieces), with four valves per cylinder: 24 intake and 24 exhaust. The crossheads open two valves at once — there are 24 of them.
  • There are two camshafts — one per cylinder bank: right 6215-41-1100 and left 6215-41-1200. Journal diameter — 65 mm; cam height: intake 55.48 mm, exhaust 55.75 mm.
  • Cylinder head bolts are tightened into the plastic zone (147 → 289 N·m + 90°), a maximum of five uses. Flatness of the cylinder head mating face — 0–0.06 mm (limit 0.09 mm); injector nozzle protrusion — 2.3–2.9 mm.
  • Valve clearances with the engine cold: intake 0.35 mm, exhaust 0.57 mm; locknut — 58.8 N·m.

9.4. Drive, lubrication and cooling

  • The valve timing and auxiliary drive is gear-driven, with a front gear cover (an optional item of the long block).
  • Oil pump — reference number 6219-51-1000, part of the long block. Oil cooler — optional.
  • Water pump — numbers 6219-61-1100 / 1101 / 1102 by Engine S/N (section 16); optional. Common pump parts: impeller 6219-61-1470, shaft 6219-61-1230, gear 6215-61-1160, housing 6219-61-1120.

9.5. Air, fuel and electronics

  • Turbocharging with an air-to-air charge air cooler; turbochargers and coolers are carried over from the old engine.
  • Common Rail (HPCR): electronic injection control; the fuel equipment and ECU are carried over from the old engine.
  • Torsional vibration damper — 6215-31-8200, crankshaft pulley — 6215-31-1530.

10. Variants: letters, serial numbers, neighbouring engines

10.1. What -3A, -3B, -3C, -3D, -3E mean

The letter after “-3” defines the variant for the machine. The table is a guide to the variants and the starting engine serial numbers per parts catalogues; the exact range for your engine is confirmed from the nameplate.

SAA12V140E-3 variants and starting Engine S/N (per parts catalogues, for reference)
VariantMachinesStarting Engine S/N
-3AD475A-5E0, D475ASD-5E0502127-UP
-3BHD785-7502254-UP; 505077-UP
-3CPC2000-8501918-UP
-3DWA900-3E0502369-UP
-3EWA800-3E0502033-UP
-3B-02revision of variant -3Bits own range; boundaries by water pump — section 16
-3E-02revision of variant -3E500001-UP

10.2. What “502254-UP” means

“502254-UP” is a range that starts at the stated engine serial number and continues onward within the conditions of the particular publication. Within a catalogue, individual lines may have their own conditions: “from–to”, “and above”, a replacement number, a note. So “UP” is read together with the variant and the diagram, and the reliable way is to check against your Engine S/N.

10.3. Other Komatsu engines with a 140 mm bore: they do not relate to our long block

Our long block is intended only for the SAA12V140E-3. The engines in the table below have similar names, but they are separate engines with their own part numbers and their own long blocks; they should not be confused with the SAA12V140E-3.

Other Komatsu engines with a 140 mm cylinder bore (not the SAA12V140E-3)
EngineMachinesComment
SA12V140-1HD785-3, HD785-5, D475A-2, WA800-2Previous generation, its own part numbers and its own long block
SAA12V140ZE-2WA900L-3A different engine, its own nomenclature
Engines of the PC2000-11 and WA900-8 machinesPC2000-11, WA900-8Different engines; parts and long blocks are selected separately

Do not confuse the V12 engine with Komatsu in-line engines: the SAA6D140E-5 has the same cylinder bore — 140 mm, but the block, heads and part numbers are completely different (see the article on the SAA6D140E-5).

11. Specifications by machine

The values come from Komatsu machine brochures and the 12V140E-3 engine manual: gross power and net power. Power, rated speed and idle speed are set by the variant, not by “the engine in general”.

Gross power of the SAA12V140E-3 by machineBar chart: gross power of 636–895 kW across five machines.Gross power of the SAA12V140E-3 by machine, kWHD785-7895 kW (1,200 hp) @ 1,900PC2000-8728 kW (976 hp) @ 1,800WA900-3E0672 kW @ 2,050D475A-5E0 / D475ASD-5E0671 kW (899 hp) @ 2,000WA800-3E0636 kW @ 2,000Power is set by the engine variant for each specific machine (Komatsu brochures and the engine manual).
Fig. 3. Gross power of the SAA12V140E-3 by machine. Gross values at rated speed.
SAA12V140E-3 specifications by machine (Komatsu documentation)
MachineVariantGross, kW (hp) / rpmNet, kW (hp) / rpmLow idle, rpm
HD785-7-3B895 (1 200) / 1 900879 (1 178) / 1 900—
PC2000-8-3C728 (976) / 1 800713 (956) / 1 800—
WA900-3E0-3D672 / 2 050638 (856) / 2 050680 (+50/0)
WA800-3E0-3E636 / 2 000603 (808) / 2 000680 (+50/0)
D475A-5E0, D475ASD-5E0-3A671 (899) / 2 000664 (890) / 2 000660 ± 40

Common to all variants: 12 cylinders 140 × 165 mm, 30.48 L, turbocharging, air-to-air charge air cooling, electronic Common Rail system, EPA Tier 2. A dash means the value is not published in the documentation available to us.

11.1. Calculated figures (our calculation from the specification data)

These values help to understand the load on the engine and to compare the variants with each other. They are not manufacturer's figures but calculations from the specification data: specific output — gross power ÷ 30.48 L, mean piston speed — 2 × stroke × speed, torque at rated speed — power ÷ angular speed.

Calculated figures by machine — our calculation from Komatsu specification data
MachineSpecific output, kW/LMean piston speed at rated speed, m/sTorque from power at rated speed, N·m
HD785-729,410,54 498
PC2000-823,99,93 862
WA900-3E022,011,33 130
D475A-5E0 / D475ASD-5E022,011,03 204
WA800-3E020,911,03 037

The HD785-7 truck runs at the highest specific output in the group, and the PC2000-8 excavator at the lowest piston speed (1,800 rpm): this shows that the same block is tuned both for maximum output and for prolonged work with the hydraulic system.

12. Valve timing and valve adjustment

The valve timing of the SAA12V140E-3 per the Komatsu manual is given below; duration and overlap are our calculation from this data.

Valve timing and valve adjustment
ParameterValueComment
Intake valve opens (IVO)20° BTDCper the manual
Intake valve closes (IVC)30° ABDCper the manual
Exhaust valve opens (EVO)55° BBDCper the manual
Exhaust valve closes (EVC)20° ATDCper the manual
Intake / exhaust duration230° / 255°calculation: 20 + 180 + 30 and 55 + 180 + 20
Valve overlap40°calculation: 20° + 20°
Valve clearance (cold): intake / exhaust0.35 / 0.57 mmadjusting screw locknut — 58.8 N·m
Seat angle: intake / exhaust30° / 45°per the manual

Part III. Reference

This part is reference material. The dimensions and torques are taken from the Komatsu manual for the 12V140E-3 engines, for comparison and for assessing the condition of parts. Before any work, check the edition of the manual for your Engine S/N: tolerances and the tightening sequence are set by it. Units: dimensions — mm, torques — N·m. “Limit” — the value at which the part is replaced or restored.

13. Part dimensions and tolerances

13.1. Cylinder block, liners, cylinder head

Cylinder block, liners and mating faces
ParameterStandardLimit / action
Flatness of the cylinder head mating face0–0,060,09
Injector nozzle protrusion2,3–2,9—
Main bearing bore157 (+0,025 / 0)—
Main bearing shell thickness4,5—
Main bearing shell inside diameter148148,20 / 148,23
Liner inside diameter: groups S and L140S — 140,12; L — 140,14
Liner ovality—0,02
Liner protrusion above the block face0,07–0,15—
Liner upper flange: outside diameter170,2—
Liner lower seating land: outside diameter / interference161,2 / 0,02–0,12—
Liner sealing ring zone: outside diameter158—

13.2. Crankshaft

Crankshaft journals and undersizes
SizeMain journal, mmCrankpin journal, mm
Standard (STD)148; wear limit 147.97100; wear limit 99.87
Undersize 0.25147,7599,75
Undersize 0.50147,5099,50
Undersize 0.75147,2599,25
Undersize 1.00147,0099,00
  • Crankshaft end float — 0.140–0.32, limit 0.50.
  • “Bearing shell — main journal” clearance — 0.100–0.175 (at support 4 — 0.130–0.205).
  • “Bearing shell — crankpin journal” clearance — 0.046–0.126, limit 0.17.
  • Crankshaft gear — 45 teeth.

13.3. Camshafts and valves

Camshafts, valves and springs
ParameterStandardLimit
Camshaft end float0,1–0,250,36
Camshaft journal diameter65—
Cam height: intake / exhaust55,48 / 55,7555,08 / 55,35
Valve stem diameter10—
“Stem — guide” clearance: intake0,034–0,071—
“Stem — guide” clearance: exhaust0,063–0,100—
Seat angle: intake / exhaust30° / 45°—
Valve spring free length (outer / inner)81,7 / 72,0—
Valve clearance (cold): intake / exhaust0,35 / 0,57adjust

13.4. Connecting rod and piston group

Connecting rods, pistons and rings
ParameterStandardNote
Small-end bushing diameter52“bushing — pin” clearance 0.030–0.055
Big-end diameter106—
Connecting rod centre distance340—
Piston skirt diameter: group S140 (−0,120 / −0,135)—
Piston skirt diameter: group L140 (−0,105 / −0,120)—
Piston pin: diameter52“piston — pin” clearance 0.035–0.051
Top ring end gap0,42–0,57—
Second ring end gap1,15–1,30—
Oil ring end gap0,30–0,50—

14. Tightening torques

Special tightening torques of the 12V140E-3 engine
FastenerSequence / stepTorque, N·m
Cylinder head bolts [1]–[6]1st step → 2nd step → angle147 → 289 → 90°
Cylinder head bolt [7]—68,6
Main bearing bolts1st step → 2nd step → angle284 → 569 → 90°
Connecting rod bolts1st step → angle74 → 90°
Crankshaft adapter boltsthree steps74 → 245 → 745
Crankshaft damper bolt—108 ± 10
Injector holder bolt—66,7
High-pressure tube—44,1
Cylinder head cover bolts—32,4
Valve adjusting screw locknut—58,8
Crosshead—58,8

Cylinder head bolts are tightened into the plastic zone: each such bolt is used no more than five times. The tightening sequence is set by the diagram in the Komatsu manual for your Engine S/N.

15. Catalogue numbers of the main parts

A reference extract for search and cross-checking. The numbers help to match a part when ordering; the final assignment to your engine is confirmed by us from the Engine S/N and the current supersession catalogue. “Assembly” items and individual parts are different product items.

Main parts of the SAA12V140E-3: reference numbers and quantity per engine
№PartReference numberQty
1Cylinder block6219-21-12001
2Cylinder liner6211-22-222012
3Crankshaft6219-31-1100; gear 6215-31-1140, key 04010-007281
4Connecting rod, left / right6219-31-3200 / 6219-31-3100; bushing 6261-31-3130, bolts 6215-31-3310 (4), washers 6215-31-3330 (4)6 + 6
5Piston6219-31-211012
6Piston rings (set per cylinder)6261-31-203012 sets
7Piston pin / retaining ring6211-31-2410 / 04065-0522012 / 24
8Main bearing shells STD (set)6215-21-8001 = 6215-21-8011 (supports 1, 2, 3, 5, 6, 7) + 6215-21-8021 (support 4); thrust 6215-21-80501 set; thrust — 3 half-rings
9Connecting rod bearing shells STD6215-31-306012
10Camshafts, right / left6215-41-1100 / 6215-41-12001 + 1
11Cylinder head6219-11-110012
12Intake valve6217-41-411024
13Exhaust valve6215-41-422024
14Cylinder head gasket STD6210-17-1814; OS 0.40 version — 6210-19-181412
15Valve crosshead6210-41-562024
16Valve stem seal6217-41-454048
17Oil pump6219-51-10001
18Water pump (optional)6219-61-1100 / 6219-61-1101 / 6219-61-1102 — by Engine S/N1
Undersize connecting rod bearing shells (per parts catalogues)
SizeReference number
Undersize −0.256215-39-3060
Undersize −0.506215-38-3060
Undersize −0.756215-37-3060
Undersize −1.006215-36-3060

The complete unit — REMAN long block.

16. Parts that depend on the engine serial number

Even within the SAA12V140E-3, some parts change by serial number or variant. This is normal Komatsu practice for any long-lived series — and that is exactly why we select the long block and parts by your ESN.

SAA12V140E-3 water pump: number by Engine S/N
VariantEngine S/N rangePump number
3B-02500013–5004486215-61-1506
3B-02from 5004496219-61-1100
3E (502033-UP)502033–5062366219-61-1100
3E (502033-UP)506237–506401 (SCC A2)6219-61-1101
3E (502033-UP)from 5064026219-61-1102
3B (505077-UP)505077–5062346219-61-1100
3B (505077-UP)506235–5063996219-61-1101
3B (505077-UP)from 5064006219-61-1102

Common pump parts: impeller 6219-61-1470, shaft 6219-61-1230, gear 6215-61-1160, seals 6166-61-1511 and 6150-61-1510, bearings 06330-06206 and 06340-06306, housing 6219-61-1120.

Other revisions by variant (per parts catalogues)
AssemblyFeature
Cylinder headThe cylinder head number is the same — 6219-11-1100. In revision 3B-02 the lower spring seats are 6217-41-4531 (48 pcs); in revision 3E-02 — 24 seats and 24 valve rotators 6219-41-4510
Main bearing shellsSTD set — 6215-21-8001 (7 items: 6215-21-8011 ×6 + 6215-21-8021 ×1); in the list for variant 3E 502033-UP the set is called 6215-21-8000
Connecting rod bearing shells6215-31-3060 STD and four repair sizes (section 15)

17. Five selection mistakes that cost the most

  1. Selecting “by family”. The SAA12V140E-3 is not the SA12V140-1 or the SAA12V140ZE-2: each engine has its own part numbers and its own long block (section 10). Check the full engine name, including the letter.
  2. Selecting by machine without the index. WA900-3E0 and WA900L-3, D475A-5E0 and D475A-2, HD785-7 and HD785-5 are different machines with different engines. The index is part of the name.
  3. Ignoring the ESN limits. The water pump, the bearing sets and the cylinder head spring set change with serial numbers (section 16). A photo of the engine plate settles the question at once.
  4. Mixing assembly levels. The front gear cover, oil cooler, water pump, gasket kit and injectors are optional. Agree the set in the specification before ordering, not during installation.
  5. Confusing Engine S/N with Machine S/N. They are different numbers and do not have to match after an engine swap. Selection needs both.

18. Preparing for the swap: what to collect before disassembly

18.1. Before disassembly

Record the full engine marking, the Engine S/N, the machine model and the Machine S/N, and if possible save the fault codes and the service history. Describe the problem: oil pressure, oil consumption, loss of power, overheating, smoke, hard starting, fuel or coolant contamination, noises, leaks. The same symptoms have different causes, so diagnosis comes before the decision to replace the unit.

18.2. Mechanical part

Block and liners — geometry and fits; crankshaft — journals, runout, cracks; connecting rods — geometry and bushings; pistons — surfaces and rings; cylinder heads — sealing, seats, guides, valve train. The fitness criteria are in section 13. If wear has reached several components at once, a long block often pays off better than component-by-component repair: all the dimensions in it are brought back to specification at the same time.

18.3. After installation

Pre-lubricate the lubrication system before the first start, tighten the fasteners according to section 14, run in the engine according to your machine's manual, check the oil pressure and temperatures, and record the long block's serial number in the machine's log.

Conclusion

The Komatsu SAA12V140E-3 is not a single “1,200 hp engine” but a 30.48 L V12 diesel platform with different versions for different machines. Komatsu documentation confirms its use in the HD785-7 truck, the PC2000-8 excavator, the WA800-3E0 and WA900-3E0 loaders and the D475A-5E0 / D475ASD-5E0 dozers.

For a correct selection it is enough to answer five questions: which exact engine is installed, what is its serial number, which machine it works in, which unit is actually needed, and which reference number confirms it. That avoids the costliest mistakes — ordering the wrong short block, water pump or long block. And if you need a long block, send us a photo of the engine plate and the machine serial number: we will check the version, send the specification and a photo of the unit’s plate, and you will get a ready mechanical “heart” for your SAA12V140E-3 with an individual warranty.

Questions and answers

What does SAA12V140E-3 mean?

It is the model of a Komatsu engine. S — turbocharger, AA — air-to-air charge-air cooling, 12V — twelve cylinders in a V (diesel), 140 — cylinder bore in mm, E — generation designation, “-3” — series. The letter after the series (-3A, -3B, -3C, -3D, -3E) is the version for a specific machine.

How many cylinders does the SAA12V140E-3 have and what is its displacement?

Twelve cylinders, displacement 30.48 L (2.54 L per cylinder — calculated from the 140 mm bore and 165 mm stroke). A four-stroke liquid-cooled diesel with direct injection, a turbocharger and air-to-air charge-air cooling.

How much horsepower does the SAA12V140E-3 have?

Power depends on the version. Gross power: HD785-7 — 895 kW (1,200 hp) at 1,900 rpm; PC2000-8 — 728 kW (976 hp) at 1,800; WA900-3E0 — 672 kW at 2,050; D475A-5E0 — 671 kW (899 hp) at 2,000; WA800-3E0 — 636 kW at 2,000. Net power: 879, 713, 638, 664 and 603 kW respectively.

Which machines use the SAA12V140E-3?

The HD785-7 mining truck, the PC2000-8 hydraulic excavator, the WA800-3E0 and WA900-3E0 wheel loaders, and the D475A-5E0 and D475ASD-5E0 dozers. The detailed list is in section 3; we confirm the exact version for your machine from the Engine S/N.

How does the SAA12V140E-3 differ from the SA12V140-1 and the SAA12V140ZE-2?

They are different engines with their own part numbers and their own long blocks. The SA12V140-1 was fitted to the HD785-3 / -5, D475A-2 and WA800-2; the SAA12V140ZE-2 to the WA900L-3; the PC2000-11 and WA900-8 machines are fitted with other engines. The long block for the SAA12V140E-3 is selected for the SAA12V140E-3.

What do the letters -3A, -3B, -3C, -3D, -3E mean?

The letter after “-3” is the version for the machine: -3A — D475A-5E0 / D475ASD-5E0 dozers (Engine S/N from 502127), -3B — HD785-7 (from 502254 and from 505077), -3C — PC2000-8 (from 501918), -3D — WA900-3E0 (from 502369), -3E — WA800-3E0 (from 502033). The “-02” revisions (3B-02, 3E-02) have their own serial number ranges.

What is a long block?

A long block is an engine without accessories: cylinder block, crankshaft, pistons with connecting rods, cylinder heads with valves and the valve train. Turbochargers, the high-pressure fuel system, manifolds, electronics and other accessories are normally transferred from the old engine.

How does a long block differ from a short block?

A short block is the lower part: cylinder block, liners, crankshaft, pistons, connecting rods, bearings, without cylinder heads. A long block includes the cylinder heads and the valve train. A complete engine is the whole powerplant.

What does the SAA12V140E-3 long block include?

Cylinder block, crankshaft, pistons with connecting rods, cylinder heads with valves, the valve drive (camshafts, tappets, rocker arms), front drive gears and the oil pump. Optional — front gear cover, oil cooler, water pump, gasket kit and injectors. We confirm the composition of each unit in the specification before payment.

What is optional in the REMAN long block?

Front gear cover, oil cooler, water pump, gasket kit and injectors (for the electronic fuel system). They can be included in the delivery or transferred from the old engine; the choice is recorded in the specification before payment.

What is transferred from the old engine?

Fuel equipment, turbochargers and charge-air coolers, intake and exhaust manifolds, flywheel and flywheel housing, damper, starter, alternator, sensors, ECU with harness, oil pan, filters and brackets.

What numbers exist for the long block and short block of the SAA12V140E-3?

For the short block, the reference number is 6219-SE-0011 (HD785-7, PC2000-8). The number RM6219-LE-0100 appears in commercial documentation for remanufactured long blocks. The numbers are given for search and cross-checking; the unit supplied is defined by its own plate and serial number.

What does RM mean in the number RM6219-LE-0100?

The prefix RM in Komatsu numbering marks remanufactured nomenclature. Do not confuse it with machine indexes: in the SAA12V140E-3, the letters after “-3” denote the engine version, not reman.

Do you have a complete REMAN engine, not just the long block?

Yes, complete REMAN engines are separate pages on the site: “Komatsu HD785-7 SAA12V140E-3 REMAN engine” and “REMAN engine for Komatsu PC2000-8”. A long block is chosen when the accessories of the old engine are in good condition and are transferred.

What information is needed to select a long block?

The full engine name with the version letter, the Engine S/N (photo of the plate), the machine model and serial number, the required assembly level (short block, long block, complete engine), the previous part number if known, and photos of the old engine from the front and both sides.

Will the long block fit my machine?

It is determined by the chain: reference number → exact version (-3A…-3E) → Engine S/N → machine model → Machine S/N. Send a photo of the engine plate and the machine serial number — we will check the version and the serial range and send the specification.

Can a long block be installed on an engine with a different version letter?

There is no universal interchangeability between versions: within the series there are part revisions (cylinder head, water pump and bearing sets change with serial numbers), so we confirm each case from the Engine S/N.

One long block for both the HD785-7 truck and the PC2000-8 excavator?

The engine base is the same, and the reference short block 6219-SE-0011 is listed for both machines. The version (-3B and -3C), the accessories and the serial number ranges differ, so we always check your engine’s plate.

Is it a Komatsu product or an independent one?

It is a remanufactured (REMAN) long block for a Komatsu engine. CATKOMPARTS is an independent supplier, not an official dealer or representative of Komatsu. Identification data for each unit (plate photo, serial number) is provided on request; for the batch in transit — after it arrives at the warehouse.

What is the number of your long block?

The unit is identified by its own plate and serial number. The product code on the page is CKP-LB-SAA12V140E3-REMAN; the numbers RM6219-LE-0100 and 6219-SE-0011 are reference numbers, for search and cross-checking.

What warranty does the long block have?

The warranty on long blocks is agreed individually and recorded in the specification or invoice of the specific unit.

When will the REMAN long block for the SAA12V140E-3 be available?

The first batch — 3 units — is expected around 15 February 2027 at the CATKOMPARTS warehouse in Guarulhos (São Paulo, Brazil). Payment first, then shipment.

How do I buy a long block and how is delivery arranged?

Send a photo of the engine plate and the machine serial number through the form on the site or by WhatsApp, on the long block page. Brazil — pickup at the Guarulhos warehouse or delivery within the country; export — handover to your logistics company; Russia — delivery by agreement to the customs port (Vladivostok or Saint Petersburg), 100% prepayment.

What are the tightening torques for the cylinder head, main bearing and connecting rod bolts?

Cylinder head bolts [1]–[6]: 147 → 289 N·m, then 90° angle; bolt [7]: 68.6 N·m. Main bearing bolts: 284 → 569 N·m, then 90° angle. Connecting rod bolts: 74 N·m, then 90° angle. Cylinder head bolts are reused at most five times. Details in section 14; always check the manual for your Engine S/N.

What are the valve clearances of the SAA12V140E-3?

With the engine cold: intake valves 0.35 mm, exhaust 0.57 mm; the adjusting screw locknut is tightened to 58.8 N·m.

What is the valve timing of the SAA12V140E-3?

The intake valve opens 20° before TDC and closes 30° after BDC; the exhaust valve opens 55° before BDC and closes 20° after TDC. By calculation, this gives an intake duration of 230°, exhaust 255° and an overlap of 40°.

What is the permissible cylinder liner diameter?

Nominal bore — 140 mm, groups S and L; wear limit — 140.12 mm (group S) and 140.14 mm (group L). Out-of-roundness — at most 0.02 mm.

What is the crankshaft end play?

Standard 0.140–0.32 mm, limit 0.50 mm.

What are the crankshaft journal repair sizes?

Main journals: STD 148 mm (wear limit 147.97), repair 147.75 / 147.50 / 147.25 / 147.00 mm. Rod journals: STD 100 mm (wear limit 99.87), repair 99.75 / 99.50 / 99.25 / 99.00 mm.

What are the connecting rod bearing numbers, including repair sizes?

Standard — 6215-31-3060 (12 pieces per engine). Repair: −0.25 mm — 6215-39-3060, −0.50 mm — 6215-38-3060, −0.75 mm — 6215-37-3060, −1.00 mm — 6215-36-3060.

Which water pump is fitted to the SAA12V140E-3?

The number depends on the Engine S/N: 6219-61-1100, 6219-61-1101 or 6219-61-1102. The serial number limits for versions 3B-02, 3E and 3B are in section 16. In the long block, the water pump is optional.

How do the cylinder heads differ in the 3B-02 and 3E-02 revisions?

The cylinder head number is the same — 6219-11-1100. The spring set differs: the 3B-02 has lower spring seats 6217-41-4531 (48 pcs), the 3E-02 has 24 seats and 24 valve rotators 6219-41-4510.

How many valves and camshafts does the engine have?

Each cylinder has four valves: 24 intake and 24 exhaust in total, 24 valve crossheads. There are two camshafts — one per cylinder bank: right 6215-41-1100 and left 6215-41-1200.

Are the connecting rods of the left and right banks the same?

No. The left rod 6219-31-3200 (6 pcs) is for the left bank, the right rod 6219-31-3100 (6 pcs) for the right.

How is the first start done after the swap?

Before the first start, pre-lubricate the lubrication system, tighten the fasteners to the torques in the Komatsu manual and run in the engine according to your machine's manual. The long block's serial number is recorded in the machine's log.

Can I use parts from other engines on the SAA12V140E-3?

Parts are selected by the numbers and the ESN of the SAA12V140E-3 engine: the SA12V140-1 and SAA12V140ZE-2 have their own numbers and their own long blocks.

Glossary

Long Block
The mechanical engine assembly: block, crankshaft, pistons with connecting rods, cylinder heads with valves, valve train, without most accessories.
Short Block
The lower part of the engine: block, liners, crankshaft, pistons, connecting rods, bearings, without cylinder heads.
Complete Engine
The whole powerplant; the accessory composition is defined by the number.
REMAN / remanufactured
A unit that is disassembled, cleaned, inspected and reassembled with parts replaced or restored to the specified dimensions.
ESN / Engine S/N
Engine serial number, from the plate. It defines the application limits of parts in the catalogue.
Machine S/N
Machine serial number. It does not replace the Engine S/N.
Gross / Net
Gross power at the flywheel and net power with the equipment installed.
Common Rail (HPCR)
A fuel system with a high-pressure common rail and electronic injection control.
Tier 2
The US environmental class (EPA) that the engine meets in the machines.
Valve crosshead
A part through which the rocker arm opens two cylinder valves at once.
Repair sizes (US)
Reduced crankshaft journal diameters of 0.25 / 0.50 / 0.75 / 1.00 mm and the corresponding thicker bearings.
Plastic-region tightening
Tightening by an additional angle after a preliminary torque; these bolts can be reused a limited number of times.
FCD
Spheroidal graphite cast iron — the material of the engine piston.

Sources

The data in the article was gathered from Komatsu documentation and brought together into a single overview; catalog numbers are given for reference and confirmed through the chain in section 7.

  • Komatsu, shop manual for the 12V140E-3 series engines: SEN00307-05 (construction, dimensions, tightening torques), SEN00311-03 (standard value tables) — request the current edition for your Engine S/N.
  • Komatsu brochures and specifications for the HD785-7 (CEN00136), PC2000-8 (CEN00130), WA800-3E0 (CEN00186), WA900-3E0, D475A-5E0 (CEN00075) — gross and net power, speeds, emission class.
  • Komatsu reference lists and parts catalogues — for the reference numbers (sections 5, 15, 16); they do not replace selection by Engine S/N.

Calculated values (section 2, section 11.1 and section 12) are the author’s calculations from Komatsu technical data, not manufacturer figures. The long block image on the product page and in the article is an illustration.

Komatsu® is a registered trademark of Komatsu Ltd. The brand name, the designations of engine and machine models and the catalogue numbers are used only to indicate the application of the product and for identification. CATKOMPARTS (Catcom Parts) is an independent supplier and is not an official dealer or representative of Komatsu Ltd. The product is not manufactured or remanufactured by Komatsu unless expressly stated otherwise in the documents for the specific unit.

19/11/2026